:: HELP, Hub is rusted to knuckle. How do I get off?::
#16
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
with the help from some great members here on the forum I was able to do this job in about 6 hours. Took 4 hours to do the first side and then only about 1.5 hours for the second side. Jeep rides a little smoother now. Can definitely feel a difference when hitting pot holes. The front end doesn't bounce around and make a loud noise now.
Thanks for all the help everyone! Now onto the next job, Replacing the drag link and tie rod. This should be much easier however.
Thanks for all the help everyone! Now onto the next job, Replacing the drag link and tie rod. This should be much easier however.
Thread
Thread Starter
Forum
Replies
Last Post
LBJeepDad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-12-2016 08:12 PM
BigC9164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
04-08-2016 03:40 PM
mark4077
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-07-2016 06:04 PM
BigC9164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-07-2016 12:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)