help!! L.F. caliper siezed

Reply Subscribe

Thread Tools

Search this Thread

01-07-2013 | 09:23 AM

#16

salad

Herp Derp Jerp

Joined: Nov 2011

Posts: 18,251

Likes: 13

From: Parham, ON

Year: 1999

Model: Cherokee

Engine: 4.0L OBD-II

Quote:

Originally Posted by Turbo X_J

Proportioning valve? It doesn't have ABS does it? Number cause of a siezed caliper is moisture, when is the last time you flushed the fluid? Are you sure the flex hose is not collapased?

Quote:

Originally Posted by Bustedback

If that was the case both calipers would be siezed. There are only two lines that come out of the master cylinder, one for the front brakes and one for the rear brakes. A master cylinder piston hanging up would not effect only one caliper.

90% sure my 99 has 3 lines at the proportioning valve, 1 to the rear and 1 for each front.

Reply Like

01-07-2013 | 11:48 AM

#17

woodgrain

Thread Starter

Newbie

Joined: Jan 2013

Posts: 11

Likes: 0

From: BC canada

Year: 1999

Model: Cherokee

Engine: 4.0L

Couple good Suggestions here ill give them a try and let you know how it goes.

Reply Like

01-07-2013 | 08:29 PM

#18

woodgrain

Thread Starter

Newbie

Joined: Jan 2013

Posts: 11

Likes: 0

From: BC canada

Year: 1999

Model: Cherokee

Engine: 4.0L

So yeah to anyone that has a 99 Cherokee be aware there is two different rotor sizes one has a quarter inch deeper offset which if used in the wrong jeep presses it against the housing not allowing the wheel to turn. Correct rotor=problem. Solved. Thanks again everybody

Reply Like