hey guys quick question
#1
Thread Starter
Junior Member
Joined: May 2010
Posts: 61
Likes: 0
From: wellington
Year: 1999
Model: Cherokee
Engine: 4.0 v6
hey guys quick question
if i buy 2 inch coil spacers and 2inch add shackles will i have to buy new shocks or anything else.its a 1999 cherokee sport 4wd...Im sorry its my first jeep sooo im a neebie but i love my jeep
#3
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
You can do a 2" lift and use your stock shocks.. But, you will damage them if you do much off-roading. So, if you plan to wheel it get longer shocks
#5
Thread Starter
Junior Member
Joined: May 2010
Posts: 61
Likes: 0
From: wellington
Year: 1999
Model: Cherokee
Engine: 4.0 v6
oo ok it just the shocks soo i wanna get a 5inch lift by the end of the summer soo if im gonna buy shocks ill need to buy some that will work for a five inch kit. is that possible?
#6
Newbie
Joined: May 2010
Posts: 26
Likes: 0
From: Sussex NJ
Year: 1999
Model: Cherokee
Engine: 4.0L (242 CID) I6 MPI
if you feel like spending the extra pennie then you can get shock extenders for the front
Not Shurr how good they hold up but it will save your fronts from blowing out
Not Shurr how good they hold up but it will save your fronts from blowing out
#7
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
Not bad to wheel with a spacer. It bad on the shock if they are too small, stock shocks are at their max limit with a 2" lift. Stock shocks are meant for the street and 0" lift.
Trending Topics
#10
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
Do you have arear sway bar? If, so remove it.. Take the mounting bracket and bolt it where the rear shock mounts to the body, then bolt the rear to that. Instant shock extenders. Then get longer front shocks. Total cost approx $50, for the front shocks.
#11
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
#14
Newbie
Joined: May 2010
Posts: 26
Likes: 0
From: Sussex NJ
Year: 1999
Model: Cherokee
Engine: 4.0L (242 CID) I6 MPI
just do the extendors on the front and flip the bracket in the rear and you should be goo for now and if your putting on a bigger lift any way then just save the money and get shocks that will work with it