how to get rid of death wobble.. ! helpp!!
#17
Senior Member
Join Date: Aug 2009
Location: Effingham, N.H.
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I just said screw it and replaced everything. Pricey yes but at least I know everyting is good. Honestly after the ball joint, tie rods, and all the bushings it was probly around $300 and some change. I did all the labor cause... well.... I can.
#19
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
Nice.
#20
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Long Island, New York
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 H/O
my tie rods are good and so are my control arm bushings. the main suspect is the alignment ive realized i havent got one since i did my lift and put bigger tires on. for the hell of it im replacing my steering stabilizer and putting in a new trac bar.im gunna put an end to this
#22
Newbie
Join Date: May 2010
Location: Evansville Indiana
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: chevy 355
xj death wobble
i have an xj and i have death wobble i have check everythjing it has a 12 inch lift with chevy full with axle swap only thing i could come up with is that the upper control arm mounts are not the same height off the axle housing one on the houg heads and one on the housing its self is that wrong?
Thread
Thread Starter
Forum
Replies
Last Post
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-28-2015 10:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)