Kristo

take off your valve cover and look between 3-4, That extra grease and dirt is because the engine is leaking out of the crack, at least that was the story on mine, funny how the bullet proof 4.0 broke in half, also I replaced with an Alabama head and was Happy, sounds like you might have caught this one a little late

BigVaz

Thanks for all the help guys.

Im gona go ahead & order the new head from Clearwater or Alabama.

Questions since i've never done this before...

What exactly will i need? Detailed.

Head gasket, valve gasket, new head bolts, lube, grease, sealant? specifics would be greatly appreciated from anyone who's done this.

Feel free to send me a PM. Thanks!!

BigVaz

Top, post #32

Moncheche

Yes, yes, yes, thread sealant , there's a threaded hole in Clearwater's new heads that you will have to throw a .39 cent plug into. Cut the top of headbolt 14 off. It's for a ground that can be moved , and with the threads in the way, you can't back the bolt out. (firewall gets in the way)
Check the lubrication (see my YouTube video) and make sure your lifters aren't shot. Mine were, and replacing them means removing the head, again.
Getting at the manifold bolts can be tricky. Patience. I'll post my video link in a minute.

If you need the FSM pages for this, PM me and I can email them to you.

Best of luck.

Moncheche

Here's a link to my video on rocker arm lubrication. My lifters were totally collapsed. With new ones, oil flew so much I couldn't video it.



As soon as the rain stops, I'll grab a pic of bolt 14 and the threads you will have to cut off.

Moncheche

Moncheche

Oh, new manifold gasket.