idles high & runs rich
12-22-2012, 11:11 PM
#16
Junior Member
Join Date: Jul 2011
Location: Great Falls, Mt
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L
Edit: was going to say CTS because my 88 had a similar issue when mine had a bad ground going to it but after re-reading your first post I see you've already replaced.
Last edited by nofords4me; 12-22-2012 at 11:14 PM. Reason: Re-read first post
12-23-2012, 07:20 AM
#17
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Here's a possibility. Did anyone ever turn the screw that adjusts the throttle butterfly?
Cruiser’s Renix Throttle Body Butterfly Adjustment
Okay. Let's start from scratch. First off, that's not an idle adjustment screw. It's a throttle butterfly stop screw. It's purpose is to allow the butterfly to be as close to completely closed as it can be without binding or wearing into the throttle body. It was never intended to be adjusted in the field. But, Uncle Bob didn’t know that, did he?
Engine off. Back off the butterfly stop screw with a 3/32" allen wrench until the butterfly is completely closed. Now. turn the screw in until the FAINTEST movement of the butterfly opening is detected. This can be done more easily with the throttle body removed. If you remove the throttle body, be sure to replace the gasket underneath it after thoroughly cleaning the old one off.
Revised 07/07/2012
Cruiser’s Renix Throttle Body Butterfly Adjustment
Okay. Let's start from scratch. First off, that's not an idle adjustment screw. It's a throttle butterfly stop screw. It's purpose is to allow the butterfly to be as close to completely closed as it can be without binding or wearing into the throttle body. It was never intended to be adjusted in the field. But, Uncle Bob didn’t know that, did he?
Engine off. Back off the butterfly stop screw with a 3/32" allen wrench until the butterfly is completely closed. Now. turn the screw in until the FAINTEST movement of the butterfly opening is detected. This can be done more easily with the throttle body removed. If you remove the throttle body, be sure to replace the gasket underneath it after thoroughly cleaning the old one off.
Revised 07/07/2012
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Shamrock96
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
11-18-2015 12:24 PM
GregB58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-28-2015 08:30 AM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
kjdad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
08-21-2015 08:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)