When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go hereXJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Never occurred to me to look at the page in the parts catalog where the heater control was.
I was looking at the page with the exploded view of the heater box where the blend door is.
I found it in the catalog now.
Guessing you were talking about this place:
One of the reasons I spend so much time stalking the internet for parts.
I don't ever expect to find them in good usable shape though.
At least not without buying a whole Jeep like the one above. MLOL.
I've been searching for a bottom cushion to my driver's side seat for my 2000 XJ with the grey interior and it's manual (not power operated). . I'd rather not buy the whole seat but if that's the only way I'll do it. But keep in mind my car has only 54k miles and the interior is extremely clean so I am looking for a nice cushion/seat that isn't ripped or stained. This is a picture of the seats in my car as a reference. Thanks tremendously in advance for any work you may put into this.
I have been looking for the rear Right (passenger side) Wheelhouse. This is the trim piece that sits between the plastic fender flare and inside the fender.
55000146-5 and new 55027694 panel wheelhouse outer ( for a 96 and earlier)
I have been looking for the rear Right (passenger side) Wheelhouse. This is the trim piece that sits between the plastic fender flare and inside the fender.
55000146-5 and new 55027694 panel wheelhouse outer ( for a 96 and earlier)Any leads? Thanks!
I have been looking for the rear Right (passenger side) Wheelhouse. This is the trim piece that sits between the plastic fender flare and inside the fender.
55000146-5 and new 55027694 panel wheelhouse outer ( for a 96 and earlier) Any leads? Thanks!
Ralph is overwhelmed lol, this man is going to have to create an excel sheet with what the persons name is and what they are looking for cause his old process is not going to work for very long XD.
Ralph is overwhelmed lol, this man is going to have to create an excel sheet with what the persons name is and what they are looking for cause his old process is not going to work for very long XD.
Funny you should bring that up.
I just got done rereading the whole thread to refresh my memory.
It is actually not that bad.
I have been PM'ing guys with leads.
And nobody really tells me what if anything is going on.
Did you find the part on your own, did you get it from the lead, did you follow up on the lead but not buy it?
Remember the guy you said could cut in front of you for the rear air damn.
Well I PM'ed the guy telling him that he should research all the parts that it comes with.
Sometimes you can't use the part if it is missing parts.
Anyway he said that if he got the rear air damn itself he could fabricate the mounting and whatnot.
So believe it or not I found one. Appears to just be the air damn itself.
So 9 days ago I PM'ed him. But the pricing did suck IMO.
Haven't heard a word back.
Is it people just not getting back to me?
Maybe they got busy?
Who knows?
I am leaning towards them being set.
Looks like a lot of unfinished business but until they tell me differently I am going with they are all set.
Except the last contestant with the inner fender well part.
And I just sent him some Facebook Marketplace part outs I found today.
Think even one part out showed a picture of what he needs hanging out of the wheel well. LOL.
Funny you should bring that up.
I just got done rereading the whole thread to refresh my memory.
It is actually not that bad.
I have been PM'ing guys with leads.
And nobody really tells me what if anything is going on.
Did you find the part on your own, did you get it from the lead, did you follow up on the lead but not buy it?
Remember the guy you said could cut in front of you for the rear air damn.
Well I PM'ed the guy telling him that he should research all the parts that it comes with.
Sometimes you can't use the part if it is missing parts.
Anyway he said that if he got the rear air damn itself he could fabricate the mounting and whatnot.
So believe it or not I found one. Appears to just be the air damn itself.
So 9 days ago I PM'ed him. But the pricing did suck IMO.
Haven't heard a word back.
Is it people just not getting back to me?
Maybe they got busy?
Who knows?
I am leaning towards them being set.
Looks like a lot of unfinished business but until they tell me differently I am going with they are all set.
Except the last contestant with the inner fender well part.
And I just sent him some Facebook Marketplace part outs I found today.
Think even one part out showed a picture of what he needs hanging out of the wheel well. LOL.
Well you know if you wanna just slide that good ol dam my way I will buy it mLOL
Here is a picture I pulled off the internet. I think it came from somewhere on cherokeeforum.
It is an odd plug, its not a flat panel that it pops into.
That would be a major concern, as far as destroying it. Maybe at some point I will pull the back cover on the hatch and get a look at it from the inside. Perhaps it is just something that will push out without too much trouble. Worst case scenario I can always dab a little RTV to seal it back up.
Yup they're rubber and can be gooped with your favorite sealer. My 1988 came with that plug. No problem pushing it out for the install of the rear wiper system.
Well you know if you wanna just slide that good ol dam my way I will buy it mLOL
I think you don't want it.
Thinking that it is missing parts and the pricing is up there.
Also could have been sold and just not indicated as such.
But sending you a PM.
Hey that rear air dam was a bust sad face. He wants way to much for it and he doesn't even have to hardware to put it on the darn Jeep.
BACK TO DA SEARCH
01-11-2021 | 12:30 AM
