JeepsterXJ89

Hey CF-

Before I tell you what my problem is, I need to say that I love my wife more than anything, and she has done a great job taking care of everything, including our 10 month old son, while I have been deployed.

Now, she needed to get in my 1990 while I was gone. She stuck "the square one" in the door lock and cranked. hard. it is now in two pieces, but she was able to get it out of the door, so my door locks are good.

I am an idiot, and only had the one key, so now I am looking at solutions. I ordered a new cylinder with keys online, but I am not sure that is my best solution? I know the local dealer can cut a key from the VIN. But with the wear my rig has seen, I am not positive that is going to work out. Can anyone offer some help on the swap-out? Or anything else that could be better, and cost effective? Thanks CF!

Erik

Caish

Any good locksmith can cut a new key by hand eye balling your old key or even from working a blank in the lock.

Might be worth checking in to it.

JeepsterXJ89

is that to say the cost of a locksmith is better than the effort to put in the new lock cylinder? if that is what it is, so be it, just looking for input from osmeone that has changed out a lock cylinder and/or had a key made?

liftedjeepxj

unless she is just the incredible hulk, i would assume the lock cylinder had a problem to begin with. I myself have done 4 cherokee steering column tear down and rebuilds so i have it on lock. It is fairly simple and you should be able to tear it down and install a new one.

JeepsterXJ89

ok, good to know it's not a crazy operation. any tips or <holds breath> some pics of the process?

JeepsterXJ89

Solution found. Don't know why I didn't see this before. Kudos to Abovetimberline

https://www.cherokeeforum.com/f51/st...repairs-39494/