Interior Bedliner
#1
Thread Starter
Registered Users
Joined: Mar 2009
Posts: 1,401
Likes: 0
From: Pa
Year: 1998
Model: Cherokee
Engine: 4.0
Interior Bedliner
Hey yall, I know some of you have done this to the inside of your heeps, has anyone used rustoleum bedliner the roll on...if so do you have pics, howd it work, etc. I picked up a gallon today and want to make sure itll do ok before i go forward with it
Edit that can in the pic was just regular spray paint that i was orginally going to just paint, which i did and then put carpet over, but ive gone a different route
Edit that can in the pic was just regular spray paint that i was orginally going to just paint, which i did and then put carpet over, but ive gone a different route
#3
spray on bedliner
never used your product,I have spray on bedliner and it works well."Low Pressure" material is softer and more rubber like with a coarser texture. This makes it more slip resistant. Because it has a 15-20 second gel time it can flow into low places and fill them much better than "High Pressure" can. Due to "Low Pressure's" density and thickness, it is an excellent sound deadener. Body rattle and road noise are greatly reduced. For this reason we recommend "Low Pressure" almost always for vehicle interiors and exterior also.
#6
Yeah i just finished herculining the inside of my jeep last night the small can was the perfect amount to do the inside now just waiting for it to dry so i can reinstal the seats.
Trending Topics
#8
LOL it actually had 2 big holes in the floor board when i bought it a month ago i think all there really was left on the drivers side was a plywood board the last owner put on the unibody frame to keep his feet up . i just welded in both drive and passenger floor pans front and back since the drivers rear was about a baseball size hole also.
Thats why i herculined it kind of to protect my investement in a way i guess lol.
Thats why i herculined it kind of to protect my investement in a way i guess lol.
#9
LOL it actually had 2 big holes in the floor board when i bought it a month ago i think all there really was left on the drivers side was a plywood board the last owner put on the unibody frame to keep his feet up . i just welded in both drive and passenger floor pans front and back since the drivers rear was about a baseball size hole also.
Thats why i herculined it kind of to protect my investement in a way i guess lol.
Thats why i herculined it kind of to protect my investement in a way i guess lol.
Last edited by 93XJRay; 09-17-2009 at 10:53 AM.
#10
Thread Starter
Registered Users
Joined: Mar 2009
Posts: 1,401
Likes: 0
From: Pa
Year: 1998
Model: Cherokee
Engine: 4.0
#11
#12
Hey just my 2 cents, but I know a few people that did this to there's and it gets SOOOOO hot inside its not even funny.
I would say use bed liner then install marine style carpet to insulate it and jeep the cabin temps down.
Or you can just melt your shoe soles like they do.
let me know how it works out for you.
I would say use bed liner then install marine style carpet to insulate it and jeep the cabin temps down.
Or you can just melt your shoe soles like they do.
let me know how it works out for you.