jeep died while driving
#17
Junior Member
Thread Starter
Join Date: May 2011
Location: Colorado Springs, CO
Posts: 54
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
ok so random question.....since i priced both sensors and its like 110 for both i figure i might as well replace both. if i replace the cam sensor am i going to have to retime my jeep?
#19
Junior Member
Thread Starter
Join Date: May 2011
Location: Colorado Springs, CO
Posts: 54
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
well for any of you reading this. i finally got the crankshaft position sensor changed out found a site that laid it out pretty well. took about 5 hours lol including a trip to sears to get a 10' extension. when i pulled the old cps there was grease on it so i cleaned it off and kept the sensor. thanks to freegdr for the advice last night. it did start up a bit quicker and seems to run a bit smoother but i suppose only time will tell.
Thread
Thread Starter
Forum
Replies
Last Post
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-26-2019 06:30 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-22-2015 01:43 PM
schaferjeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
08-21-2015 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)