keyless entry
#1
CF Veteran
Thread Starter
Join Date: Apr 2009
Location: Jacksonville, FL
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L
keyless entry
I have been looking to install a keyless entry kit on my jeep. I have an 89 with power door looks. Has anyone done this? Is it easy?
Thanks
Thanks
#2
remote start plus keyless entry
I am wanting to do the same. I purchased a Bulldog system that is a remote starter (model 1200) that will have remotes the size of most keyless entry systems and still have an 800 foot range with keyless entry and remote start. You can buy these for around $99.00 at AutoZone. You could just purchase the keyless entry for $59.00. I live in a climate where we get to negative 30 degrees each winter. Autozone did not have the customized plug in wiring harness that is made specifically for the Jeep Cherokee, but JC Whitney did (it is also a Bulldog Security product) for only $20.00.
They also have system that will carry 2000 feet but the remotes are the size of a small walkie talkie (no thanks).
I will be installing this in about a week and I will let you know how it goes if you are interested. With the custom wire harness I will only have about five additional wires to locate. I do not have factory power locks but whomever had the Jeep two owners ago installed power locks and a keyless system. The remotes are lost and I was told by Bulldog that as long as the wiring and actuators are in place their system can handle the lock and unlock signals.
They also have system that will carry 2000 feet but the remotes are the size of a small walkie talkie (no thanks).
I will be installing this in about a week and I will let you know how it goes if you are interested. With the custom wire harness I will only have about five additional wires to locate. I do not have factory power locks but whomever had the Jeep two owners ago installed power locks and a keyless system. The remotes are lost and I was told by Bulldog that as long as the wiring and actuators are in place their system can handle the lock and unlock signals.
#3
CF Veteran
Thread Starter
Join Date: Apr 2009
Location: Jacksonville, FL
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L
well I am just looking for keyless I dont really care about remote start. I live in FL its not cold here. I have stock power locks I really just wann know if there is an easy way to do this. I could just wire them to each unlock solenoid but I didnt wanna do that. I will just buy one and try to figure it out I guess.
#6
Junior Member
Join Date: Jun 2009
Location: Joplin, MO
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 I6
I am planning to do the same as you guys, except that my jeep does not have power locks, so I will be installing the actuators as well.. hopefully it won't be too difficult!
#7
Junior Member
Join Date: Sep 2008
Posts: 71
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4L
I installed DEI Valet 712T keyless system on my 2000 XJ last year. I think it was about $30 and works really well.
I found most of my installation questions answered on www.the12volt.com forum.
I found most of my installation questions answered on www.the12volt.com forum.
Last edited by xj2000; 07-24-2009 at 07:26 AM.
Trending Topics
#8
CF Veteran
Join Date: Apr 2009
Posts: 4,734
Likes: 0
Received 11 Likes
on
10 Posts
Year: 2015, 2012
Model: Grand Cherokee (WK2)
Engine: 3.6L
My '92 Laredo has the factory IR sensor and board in the upper console.
I did not get the remote, however.
I would like to find an easy way to get the remote lock/unlock to work again.
I did not get the remote, however.
I would like to find an easy way to get the remote lock/unlock to work again.
#9
CF Veteran
Join Date: Jul 2009
Location: Keesler AFB, MS
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 XJ
Model: Cherokee
Engine: 4.0L
I installed DEI Valet 712T keyless system on my 2000 XJ last year. I think it was about $30 and works really well.
I found most of my installation questions answered on www.the12v.com forum.
I found most of my installation questions answered on www.the12v.com forum.
Do you remember where you bought your keyless system? and by saying it works "really well" , does that mean you recommend it?
#10
Member
Join Date: May 2009
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: straight 6
if you have any questions or need a wiring diagram for your truck pm me ive been an installer for 5years and am MECP certified basic and advanced alot of the stuff on 12volt is just sent in by random people and can be false information
#13
Member
Join Date: May 2009
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: straight 6
89 xj
12 Volts red + steering column
Starter green + steering column
Ignition yellow + steering column
Accessory brown + steering column
door trigger black/white - underdash light
Parking Lights (+) blue/red dr. kick panel
Tachometer green AC coil or diag. conn.
Brake Wire white + brake switch
Power Lock white 5wi dr. kick panel
Vehicles with keyless entry will have relays in the passenger kick panel. Positive pulse lt.green for lock, tan for unlock.
Power Unlock green 5wi dr. kick panel
Vehicles with keyless entry will have relays in the passenger kick panel. Positive pulse lt.green for lock, tan for unlock.
heres a good guide to 5wire the locks just replace the wire colors with these ones this guide is for a honda but same concept best i could find with out making a diagram
its about half way down the page
http://www.honda-tech.com/showthread.php?t=2554212
12 Volts red + steering column
Starter green + steering column
Ignition yellow + steering column
Accessory brown + steering column
door trigger black/white - underdash light
Parking Lights (+) blue/red dr. kick panel
Tachometer green AC coil or diag. conn.
Brake Wire white + brake switch
Power Lock white 5wi dr. kick panel
Vehicles with keyless entry will have relays in the passenger kick panel. Positive pulse lt.green for lock, tan for unlock.
Power Unlock green 5wi dr. kick panel
Vehicles with keyless entry will have relays in the passenger kick panel. Positive pulse lt.green for lock, tan for unlock.
heres a good guide to 5wire the locks just replace the wire colors with these ones this guide is for a honda but same concept best i could find with out making a diagram
its about half way down the page
http://www.honda-tech.com/showthread.php?t=2554212
Last edited by thesundancekid; 07-09-2009 at 01:25 AM.
#14
Junior Member
Join Date: Sep 2008
Posts: 71
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4L
My installation was relatively simple -- pressing an unlock button opens four doors and a rear hatch together, no extra diode or relay was needed. Of course you could choose to be more selective as to which door to open but that will require adding a relay or two.
Click here to see 712T owners manual
Below is my own note from the installation...
<---------712T-------------><------Jeep XJ----------->
pin#--color-----use------>>><<<<--
H1/1 -- RD --- +12V supply ------- RD ------- C1-7 (ignition switch)
H1/2 -- BL --- 2nd unlock output -- not used
H1/3 -- BK/WT1- domelight input #87A --- not used, maybe later
H1/4 -- BK/WT - domelight output #30 --- not used, maybe later
H1/5 -- GN/BK- all dr lock output-- OR/VT ---- C305-6
H1/6 -- WT/BK- lock #87A normally closed --- not used
H1/7 -- VT/BK- all dr lock input-- chassis ------- GND
H1/8 -- BL/BK- all dr unlk output------ PK/VT ---- C305-7
H1/9 -- VT --- all dr unlk input--- chassis ------- GND
H1/10-- WT --- park lights flash--- BK/YL ---- C201-45
H1/11-- BK --- GND ---------------- chassis -- GND
H1/12-- BN --- horn honk ---------- BK/RD ---- C1-1 (horn switch)
H1/13--GN/BK-- factory alarm disarm ---not used
H1/14--WT/BL-- CH3 output ---------not used
H1/15-- YL --- switched ignition -- DkBL ------- C1-9 (ignition switch)
H1/16-- OR --- ground when armed output --- not used
H1/17-- RD/WT- unlock #87A normally closed --- not used
1. Ignition switch connection to YL line doesn't seem to do anything. I thought that connection enables horn and parking lights activity when key is inserted and turned to ignition without unlocking with a FOB? Parking lights work fine when locking, unlocking, or when pressing the star button, and horn honks when pressing AUX/lock, AUX/unlock, or with the star button.
Last edited by xj2000; 07-11-2009 at 12:10 AM.
#15
CF Veteran
Join Date: Mar 2009
Location: Millburn, NJ
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0HO
i think those of us with the black orb in the upper console can just order a clicker for that year jeep, and if you unscrew the plate with the orb (its actually the receiver for the remote) there should be a number in it. thats the code for your specific truck. a little google and you should be able to have a clicker working.
heres a link i found for the clicker $63 and comes with instructions.
heres a link i found for the clicker $63 and comes with instructions.