mike37

I bought my Cherokee with the lift on it from an older gentlemen
that did not know how much it was lifted
the finders are cut so that will not be a good place to measure
so I got a number from top of the axle to the frame 11-1/8
can some one with a stock jeep or with a lift that they know the hight
get a measurement for me to compare

It is a RE lift with AAL I think 4.5

MasterShakeXJ

post up a couple pics of the jeep. from looking at your avatar it looks like 4.5.

mike37

the fenders are cut so its hard to judge the hight it looks taler than it is

mike37

if you click on the my photos under my avatar
all the pics I have are posted

BuckB91XJ

Looks like about a 3-4" lift to me.

seed

front ride height on a stock xj from top of axle tube to bottom of frame should be 6 3/4 give or take 1/2"

okcjeeper

Looks to me like an RE 3.5 kit which actually typically hits around 4-4.5 inches.. I am curious what kind of fender flairs those are?

TrekkerJmm

Hi did you buy it that way with all the lights..SWEET JEEP...Tj

mike37

I don't know the brand flair they were on it wen I got it
but they look like the rubber universal fit flairs

mike37

yes but I had to re wire it all and added switches in the overhead console

mike37

I had to have a full 1-1/4 TC drop or the DS would bind

okcjeeper

Yeah I need to add a 1" t-case drop myself. I ordered it. It'll get me by till I can get that yoke mod you posted about.. Still can't wait to see how that turns out for ya.

mike37

it will be installed today
the shaft is being modded right now