New jeep help!
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
New jeep help!
So i just bought an 01 xj with 180k all i know is most of the top of the motor has been replaced. But unknowing what all was done what should i replace first before i start building. Beside spark plugs, wires, belts, oil change what else would be a good recommendations on replacement
#4
Senior Member
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Driving it, either before or after any service it needs, will let you know how loose the steering linkage is ( like mine !) specially on a windy day....
Trending Topics
#9
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 20 Likes
on
17 Posts
Model: Cherokee
It's an 01. If we're starting a forum pool, I get "head crack".
I sure wouldn't go shotgunning stuff without at least a cursory inspection. Fluids, sure. Everything else inspect and then decide. How else would you know what parts were replaced and what service performed right before you got it? No point in replacing perfectly good stuff.
I sure wouldn't go shotgunning stuff without at least a cursory inspection. Fluids, sure. Everything else inspect and then decide. How else would you know what parts were replaced and what service performed right before you got it? No point in replacing perfectly good stuff.
Last edited by Radi; 11-24-2014 at 12:34 AM.
#10
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
True. An im not sure why the top is pretty much new. I bought it from a guy i used to work for and im having him install my lift and stuff but he didnt have a lot of info on what was truely replaced
#11
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
Check the oil pressure with a mechanical gauge before you start getting really attached to it. Usually, peeps don't catch the fact that the cylinder head has cracked, and the motor is trash by the time they find out.
Thread
Thread Starter
Forum
Replies
Last Post
StPTrucker
Introductions
30
11-22-2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)