robsjeep

If you had the hood up then look inside, check wires around the fuse box, look under the jeep for perhaps a pinched wire from a jack stand, or from getting bonked with a tool. make sure fuel hose aint pinched. That is first thing to do, which is to retrace the work you done and examine every area where you might have moved, bumped, bonked, torn, pinched, clobbered, etc ...something. Do a detail visual inspect, use a bright light too.

good luck

bluejeep2001

I had the same/opposite issue when i raised my 01 To 3 inches with my OME setup...I didn't measure but the rig was perfectly level...HATED IT. I ended up putting a 1 inch spacer under the rear leafs to get the *** up a little...much happier. Will try to send pictures later