newbie question
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: Marhsalltown,Iowa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990, 1997 Grand Cherokee
Model: Cherokee(XJ)
Engine: 1995 ho using renix system
newbie question
Hello gentlemen !
I have a problem that I been trying to figure out for about 2 months now hope you guys can help ! It is a 2000 jeep cherokee sport 4x4 . It keeps throwing the code po353 ignition coil c primary/secondary circiut . I have replaced coil pack and spark plugs ! coil pack twice twice with a new one . I have taken to the shop and they have told it is the coil pack is bad . Could 3 coil packs be bad ? I disconnect the negative battery cable and leave it off for about an hour at a time . Then I drive it about 6-8 miles with no problem then engine light comes on . And it misses . I can not come up with a solution . Any help would be greatly appreciated ! thank you in advance !
Thanks,Brad
I have a problem that I been trying to figure out for about 2 months now hope you guys can help ! It is a 2000 jeep cherokee sport 4x4 . It keeps throwing the code po353 ignition coil c primary/secondary circiut . I have replaced coil pack and spark plugs ! coil pack twice twice with a new one . I have taken to the shop and they have told it is the coil pack is bad . Could 3 coil packs be bad ? I disconnect the negative battery cable and leave it off for about an hour at a time . Then I drive it about 6-8 miles with no problem then engine light comes on . And it misses . I can not come up with a solution . Any help would be greatly appreciated ! thank you in advance !
Thanks,Brad
#2
CF Veteran
Join Date: Aug 2011
Location: Blue Springs, MO
Posts: 1,031
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L Laredo
[QUOTE=welderman1969;1429332]Hello gentlemen
"I have replaced coil pack and spark plugs"
What plugs? Some Jeeps like champion copper plus best.
"I have taken to the shop and they have told it is the coil pack is bad . Could 3 coil packs be bad?
Possible I guess, but I doubt it.
"I disconnect the negative battery cable and leave it off for about an hour at a time."
If you're trying to clear the codes, i've seen various tips on doing that.. best to clear 'em with a scanner(free at AZone Oreilley etc)
From what you've said so far, I would replace the plug wires, distributor cap, and rotor.. but I do tend to throw parts at a problem
"I have replaced coil pack and spark plugs"
What plugs? Some Jeeps like champion copper plus best.
"I have taken to the shop and they have told it is the coil pack is bad . Could 3 coil packs be bad?
Possible I guess, but I doubt it.
"I disconnect the negative battery cable and leave it off for about an hour at a time."
If you're trying to clear the codes, i've seen various tips on doing that.. best to clear 'em with a scanner(free at AZone Oreilley etc)
From what you've said so far, I would replace the plug wires, distributor cap, and rotor.. but I do tend to throw parts at a problem
#4
CF Veteran
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Sounds to me like it's a potential PCM problem. The PCM has drivers for each individual trigger circuit in the coil pack and it's common for one driver to fail for one cylinder. Since you have replaced the pack 3 times i would lean towards the PCM.
#6
Junior Member
Thread Starter
Join Date: Dec 2011
Location: Marhsalltown,Iowa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990, 1997 Grand Cherokee
Model: Cherokee(XJ)
Engine: 1995 ho using renix system
Thanks for the help guys ! Hey tjc don't worry about it . At least you where trying 1
Thanks , Brad
Thanks , Brad
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Dec 2011
Location: Marhsalltown,Iowa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990, 1997 Grand Cherokee
Model: Cherokee(XJ)
Engine: 1995 ho using renix system
Not yet ! hopefully will get the part saturday and see if that works ?! I'll let you guys know what I find out !
Thanks,Brad
Thanks,Brad
#10
Junior Member
Thread Starter
Join Date: Dec 2011
Location: Marhsalltown,Iowa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990, 1997 Grand Cherokee
Model: Cherokee(XJ)
Engine: 1995 ho using renix system
Ok guys just put a different computer in . Now it starts right off but only runs for 10 seconds ! ? Am I missing something here !
More help please !
thanks,Brad
More help please !
thanks,Brad
#13
CF Veteran
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
It may be a security problem where the used PCM you have doesn't recognize the vin number. And would need to be reprogrammed in order for it too keep the jeep running
#14
Junior Member
Thread Starter
Join Date: Dec 2011
Location: Marhsalltown,Iowa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990, 1997 Grand Cherokee
Model: Cherokee(XJ)
Engine: 1995 ho using renix system
how do I get that done ? Where? Do I need to take it to dealer to reflash it ?
#15
CF Veteran
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Dealerships can do it and some small independent shops can. I know my shop has the ability to do it. But worst case scenario you may have to have the PCM sent out and be programmed.