No 5v reference voltage at cps
#1
Newbie
Thread Starter
Join Date: Aug 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
No 5v reference voltage at cps
89 comanche 4.o. I get 3.3 ref voltage at CPS. no spark situation. Is the computer bad. cause it's not sending the 5v reference
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,561 Likes
on
1,265 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CPS generates an AC voltage signal. Has nothing to do with 5v reference voltage at other sensors.
Have you visited www.cruiser54.com and completed Tips 1,3,4 and 5?
Have you visited www.cruiser54.com and completed Tips 1,3,4 and 5?
#3
CF Veteran
Join Date: Dec 2017
Posts: 4,047
Received 1,120 Likes
on
899 Posts
Year: 1989
Model: Comanche (MJ)
Engine: 4.0
X2. Renix didn't use a reference voltage like the HO senor. Stick a meter on the output of the crank sensor and look for a/c voltage while cranking. It won't be very high, and the number depends somewhat on your meter as it's not a sine wave.
Thread
Thread Starter
Forum
Replies
Last Post
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
01-30-2014 06:33 PM
tremolo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
09-30-2013 08:28 PM
neonzion
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
01-31-2013 04:00 AM
armyt.w.a.t34
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
02-09-2012 01:17 AM
Jabo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-11-2008 03:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)