Np 231 t case nightmare
12-10-2013, 06:42 PM
#1
Newbie
Thread Starter
Join Date: Apr 2013
Location: Denton, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991, 1993
Model: Cherokee
Engine: Inline-6 4.0L
Np 231 t case nightmare
I was driving home yesterday and my t case began to grind. When I got under it today I noticed that the front driveshaft where it enters the t case seemed to be out of the case after I took the front driveshaft off I could move the front input shaft all around. Can this be fixed with a new bearing and seal. It lost all it's fluid so I was wondering should I fixed it or get a used one. Thanks
12-10-2013, 06:56 PM
#2
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 40 Likes
on
36 Posts
Year: 1999
Engine: 4.0
If there's no fluid and the front yoke moves all around while rear driveshaft is still attached, with the selector in gear, I think it would be safe to say the chain is off the sprocket and that u probably have a hole in the case.
12-10-2013, 06:59 PM
#3
Newbie
Thread Starter
Join Date: Apr 2013
Location: Denton, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991, 1993
Model: Cherokee
Engine: Inline-6 4.0L
I didn't see any holes in the case. It still engages it's just the front yoke moves forward and backwards like it's not attached to what ever holds it in place and the seal is toast
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
10-01-2015 02:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)