NP242 Rebuild Kit
#2
Senior Member
Joined: Oct 2020
Posts: 892
Likes: 277
From: PA
Year: 1994
Model: Cherokee (XJ)
Engine: 4.0
You won't find one with a chain. Buy it separate; no big deal...
You'll also be hard pressed to find a good rebuild kit. I bought mid-level, I thought, and the bearings were significantly rougher than the Timken or SKF bearings I used instead. I also got Timken seals, so in the end, all I used from the kit was shifter pads and the needle bearings. If you can find a SKF or Timken kit, then it would be good, but anything less than that and you'll get better quality sourcing the parts separately. It appears the only sell one now for the 231...
You'll also be hard pressed to find a good rebuild kit. I bought mid-level, I thought, and the bearings were significantly rougher than the Timken or SKF bearings I used instead. I also got Timken seals, so in the end, all I used from the kit was shifter pads and the needle bearings. If you can find a SKF or Timken kit, then it would be good, but anything less than that and you'll get better quality sourcing the parts separately. It appears the only sell one now for the 231...
The following users liked this post:
cruiser54 (12-21-2023)
Thread
Thread Starter
Forum
Replies
Last Post
jon_89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-17-2012 06:16 PM
00SportXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-17-2011 12:50 AM
assetts91
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
05-29-2011 07:21 AM
bigins18
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
06-30-2010 07:24 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)