Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Is it possible?

Thread Tools
 
Search this Thread
 
Old 07-19-2009 | 07:49 PM
  #1  
Jamie57's Avatar
Thread Starter
CF Veteran
 
Joined: Jul 2009
Posts: 1,254
Likes: 11
From: London Ontario Canada
Year: 2000
Model: Cherokee
Engine: 4.0
Default Is it possible?

that my 91 Cherokee Limited has a Chryco 8.25 rear axle.
Was underneath it yesterday when I was moving the trailer hitch over to my 98, when I noticed that both diff covers had the rubber plug instead of a metal one. Looked online and the bolt count and rubber plug is the same. Hard to tell the gaskets the same without taking them off.
If so was there any significant difference between 91 and 98? Like say beefier axles or ratio's or something?
My 98 has a noticable ring gear howl (to me anyway) but my 91 is quiet as a church mouse.
Will make switching them a piece of cake and no worry's for me later if they are the same.
Old 07-19-2009 | 08:06 PM
  #2  
mobilecherokee4's Avatar
CF Veteran
 
Joined: Apr 2009
Posts: 1,696
Likes: 1
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

yeah should bolt right in
Old 07-19-2009 | 08:09 PM
  #3  
tkdtim's Avatar
Seasoned Member
 
Joined: Jun 2008
Posts: 322
Likes: 0
From: Green Bay, WI
Year: 1993 2 door
Model: Cherokee
Engine: 4.0L H.O.
Default

should bolt in, BUT if they are both 8.25 the 98 would have the stronger 29 spline and the 91 would have the weaker 27 spline.
Check the metal tag on your front axle diff cover to see if they have the same gears. It will be vertical on the side of the diff cover and will read somthing like 3 07 (manual) or 3 55 (auto) could even be 3 73 if you have a towing package on an auto.

Last edited by tkdtim; 07-19-2009 at 08:12 PM.
Old 07-19-2009 | 09:35 PM
  #4  
Jamie57's Avatar
Thread Starter
CF Veteran
 
Joined: Jul 2009
Posts: 1,254
Likes: 11
From: London Ontario Canada
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Originally Posted by tkdtim
should bolt in, BUT if they are both 8.25 the 98 would have the stronger 29 spline and the 91 would have the weaker 27 spline.
Check the metal tag on your front axle diff cover to see if they have the same gears. It will be vertical on the side of the diff cover and will read somthing like 3 07 (manual) or 3 55 (auto) could even be 3 73 if you have a towing package on an auto.
Front cover has been off. Can tell by the silicon. No tag
Pretty sure it doesn't have towing package and as much as I like 4 wheeling I'm just gonna use this as a DD so the axles should be OK

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:11 AM.