Power door lock switch "clicks", any ideas?
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Power door lock switch "clicks", any ideas?
First off - this forum is awesome. I just got a 2000 Cherokee Sport and it's great to see everyone else that loves their XJ as much as I do. The forum's already helped me solve my defrost-only HVAC, the window lock issue, and a broken speaker wire.
Everyone day or so the power locks stop working. When I go to lock/unlock the doors from either the passenger or driver's side door, I just hear a click from underneath both switches, but the motors don't lock/unlock the doors. It almost sounds like a relay is being energized, but nothing happens. It will then randomly start working again.
I've already re-wired a lot of the driver's side door to fix the window lock issue, and to install new speaker wires since the other ones has snapped, so I'm pretty sure it's not wire related, at least on the driver's side. When it warms up I plan on opening up the passenger door to check for broken/shorted wires, but it seems like this might be an issue w/ the switch itself, or a relay.
I've searched all over the forum as well as other sites, but haven't found anyone with the same issue. Just thought I'd see if anyone had a recommendation.
Thanks,
Andrew
Everyone day or so the power locks stop working. When I go to lock/unlock the doors from either the passenger or driver's side door, I just hear a click from underneath both switches, but the motors don't lock/unlock the doors. It almost sounds like a relay is being energized, but nothing happens. It will then randomly start working again.
I've already re-wired a lot of the driver's side door to fix the window lock issue, and to install new speaker wires since the other ones has snapped, so I'm pretty sure it's not wire related, at least on the driver's side. When it warms up I plan on opening up the passenger door to check for broken/shorted wires, but it seems like this might be an issue w/ the switch itself, or a relay.
I've searched all over the forum as well as other sites, but haven't found anyone with the same issue. Just thought I'd see if anyone had a recommendation.
Thanks,
Andrew
#4
Any luck with this.... My doors occasionally worked when I first got mine a year ago, now I just get a click coming from the passenger door area.
I have replaced the switch panel with a used one and no difference.
Almost sounds like a relay clicking but nothing happens other than the click
I have replaced the switch panel with a used one and no difference.
Almost sounds like a relay clicking but nothing happens other than the click
#6
Actually now that im thinking about this, all four worked for a week and then just the rear liftgate worked on and off for a few months and now just the click.
I think we gotta get in there when it warms up a little and get some voltage readings at the switch....
I think we gotta get in there when it warms up a little and get some voltage readings at the switch....
#7
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
cold weather will cause alot of things to stick and stiffen up id try some lube on all moving parts in mechanisms could undo rod see if they work
Trending Topics
#8
Junior Member
Join Date: Aug 2011
Location: Denver, CO
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
My 99 does this, pretty rarely though - it will act up about once a week. I have found if i open the passenger door and/or use the passenger lock switch, they work again. I will probably look for a passenger door actuator and switch next time I make it to the jy.
#9
I narrowed this down on my Jeep to a bad window/door lock control module on the passenger side. It was hard to diagnose, but finally I just got both the driver's side and passenger side control modules and tested by replacing each module. Started with the driver's side... no change. Put back the original. Changed out the passenger side and bingo... the locks all started working normally. It seems odd that a bad module on the passenger door would affect all the locks. I guess I'd assumed that the driver's side module acted as a "master" and was somewhat independent of the other. Not the case... it must be a complete circuit, and when one is bad, no locks will work right.
#10
Member
Join Date: Jul 2011
Location: Gibsonia, Pa
Posts: 146
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Originally Posted by Denver_Phil
I narrowed this down on my Jeep to a bad window/door lock control module on the passenger side. It was hard to diagnose, but finally I just got both the driver's side and passenger side control modules and tested by replacing each module. Started with the driver's side... no change. Put back the original. Changed out the passenger side and bingo... the locks all started working normally. It seems odd that a bad module on the passenger door would affect all the locks. I guess I'd assumed that the driver's side module acted as a "master" and was somewhat independent of the other. Not the case... it must be a complete circuit, and when one is bad, no locks will work right.
#11
It makes sense. The passenger door module is the brain for the locks. The drivers is just the switch. I suppose the used module I got could also be bad and I replaced a bad part with a bad part....
ugh.
ugh.
#13
passenger door lock switch clicking repeatedly.
I'm gonna try a different method to fix this issue. I found a replacement relay for the switch panel. I'm gonna replace both relays and see if this fixes the issue. I will update either way. If it works then it's only a $10 fix.
#14
I just got my jeep few days ago and just got it on the road legal today and it Just started doing this to me after it rained out bad. Power windows work but the lock switch does not work and i hear a clicking noise over on the passenger side. Lucky the guy i bought it from had extra control panels so i will be trying out that. It sucks when my key doesnt work to manually open the doors. So i need to buy new locks for it and maybe the acuator thing you guys are talking about. Looking forward to hearing if that worked for you Matt.
#15
So I ended up soldering where the plug attaches to the board, good as new. I hit every solder joint and some weren't visibly cracked on top but were under the surface.