Power steering box broken bolts
#16
CF Veteran
I would check your frame for a crack. when my sons steering bolts snapped off we were able to get the bolts out and I put new bolts in. Then I took it for a drive to see about new tires. I heard some terrible creaking noise as I turned right. So I had him turn it back and forth and the frame rail was flexing back and forth. Before you spend money on the box I'd take a close look at you frame near the steering box mount.
#17
Junior Member
Join Date: Feb 2014
Location: Lancaster, PA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
I would also highly recommend grade 8 nuts and bolts and probably a lock washer for good measure if you're going with the bolt thru and nut method. There can be a lot of stress on the box/hardware/frame.
Thread
Thread Starter
Forum
Replies
Last Post
Hewittxj
Modified XJ Cherokee Tech
35
08-31-2015 04:43 PM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-29-2015 09:31 PM
lpresnell
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
9
08-26-2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)