Power windows
#1
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 34
Likes: 0
From: Canada
Year: 1992
Model: Cherokee
Engine: 4.0
Power windows
So I bought the gf a 1999 xj,doing some repairs and stuff the only problem that Iam having a issue with is that the power windows don't work. I've read that it's a common problem but the difference is that in most cases u can still control the windows from the drivers console,on mine none of the consoles work anyone have any ideas of where to start ? Thanks
#2
Fuse, pull the driver controls out and check the plug, or all 4 motors went bad. Bang on the driver door while trying to roll it down and it might tell you if you have a bad motor or not
#3
I would start by checking the wires from the driver side window control panel. Assuming you already checked the fuse for the windows. Typically the wire from the window lockout button (sometimes the button itself) goes bad. This is why the driver controls work and the others stop working. In your case it may be multiple wires that have been severed. If all the wires are intact you may try replacing the driver side window control module itself.
I'm new at this myself so but have a similar issue and that is going to be my plan of attack. Also I stayed at a Holiday Inn last night.
I'm new at this myself so but have a similar issue and that is going to be my plan of attack. Also I stayed at a Holiday Inn last night.
#4
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 34
Likes: 0
From: Canada
Year: 1992
Model: Cherokee
Engine: 4.0
So yep pretty sure it's the switch/control module all the wires are in good shape no corrosion so I'll have to order one from rock auto thanks for all the help
#5
Member
Joined: Mar 2013
Posts: 219
Likes: 0
From: Pensacola, FL
Year: 1999
Model: Cherokee
Engine: 4.0
<<<@!1!@>>>
Or, grab a soldering gun and some solder and simply take apart the module, pop off the switches and place new solder over the connections.
Apparently there was a manufacturer defect in the solder that caused it to crack over time with vibrations.
Worked like a champ on my cherokee. All locks and windows now work with their respective door switches.
Or, grab a soldering gun and some solder and simply take apart the module, pop off the switches and place new solder over the connections.
Apparently there was a manufacturer defect in the solder that caused it to crack over time with vibrations.
Worked like a champ on my cherokee. All locks and windows now work with their respective door switches.
#6
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 34
Likes: 0
From: Canada
Year: 1992
Model: Cherokee
Engine: 4.0
So tryed brand new switch and still did nothing the motors work have put power directly to them so Iam thinking bad wire in the drivers door have checked all the fuses even though the manual does not clearly state which fuse is for the power windows, anyone have any other suggestions
Trending Topics
#8
Seasoned Member
Joined: Sep 2011
Posts: 298
Likes: 0
From: Long Island, New York
Year: 2001
Model: Cherokee
Engine: 4.0
X2 on broken wires in the grommet between the door and the chassis. I had half a dozen broken wires when I pulled my harness out. Fixed my window issue.
Thread
Thread Starter
Forum
Replies
Last Post
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
03-17-2021 08:41 PM
vegasXJ-Davey
Modified XJ Cherokee Tech
0
09-07-2015 10:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)