Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Rattle at Idle

Thread Tools
 
Search this Thread
 
Old 12-27-2009 | 12:09 AM
  #1  
dzzavid's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 80
Likes: 0
From: Cincinnati OH
Year: 2000
Model: Cherokee
Engine: 4.0
Default Rattle at Idle

I have been recently upping the maintenance and tracing down little electrical problems and sounds with my newly purchased cherokee.

I have a rattle at idle speeds sounds like it is coming from the transmission area. I found some threads that point it to the TC bolts being loose. I checked them today and they are all torqued to spec. If i move my Transfer Case lever it seems that i can manipulate to rattle to stop. If i listen carefully, i can her the rattle when i am moving but only if i go over a bump in the road. My question is, should i start at the linkage bushings? Or does that sound more like a transmission mount?

Also when in 4wd, my transfer case is very noisy. I have the 242 Transfer case. When i move the handle just slightly it starts making a little bit of noise like it is slightly engaged. Next on my maintenance list is to change the transfer case oil, i just use standard ATF fluid correct?

Also i last posted on another thread and i will include that question in this thread because i feel it might be related. My T-Case acts the same in full time as it does in part time as far as the steering binding when making turns. (( https://www.cherokeeforum.com/f2/par...-32159/index2/ ))


Thanks for all your input and suggestions!!
Old 12-27-2009 | 12:25 AM
  #2  
Abovetimberline's Avatar
CF Veteran
 
Joined: Jul 2009
Posts: 2,158
Likes: 11
From: Chico,ca
Year: 89
Model: Cherokee
Engine: 4.0
Default

A common rattle is the exhaust where it is braced at the trany,those bolts get loose.
Xfercase uses dextron 3
Old 12-27-2009 | 11:47 AM
  #3  
dzzavid's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 80
Likes: 0
From: Cincinnati OH
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Abovetimberline
A common rattle is the exhaust where it is braced at the trany,those bolts get loose.
Xfercase uses dextron 3
great i will check that out.

Thank you for the clarification on the transfer case fluid.
Old 12-27-2009 | 11:50 AM
  #4  
arsxj's Avatar
Member
 
Joined: Dec 2009
Posts: 172
Likes: 0
From: Tampa FLA
Year: 93
Model: Cherokee
Engine: 4.0
Default

Kick your catalytic converter. Betcha it rattles
Old 12-27-2009 | 01:46 PM
  #5  
Mike H.'s Avatar
Senior Member
 
Joined: Sep 2008
Posts: 680
Likes: 2
From: Phoenix AZ
Year: 1997
Model: Cherokee
Engine: I6ho
Default

Originally Posted by dzzavid
If i move my Transfer Case lever it seems that i can manipulate to rattle to stop.
the shift linkage is known to go bad and cause a rattle.
jeep has a replacement kit, fix'd mine when it was doing the same.
Old 12-27-2009 | 03:09 PM
  #6  
donnmcc's Avatar
Member
 
Joined: Jan 2009
Posts: 159
Likes: 1
From: Finley,TN
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by arsxj
Kick your catalytic converter. Betcha it rattles
That's what my rattle was.
Old 12-27-2009 | 03:20 PM
  #7  
arsxj's Avatar
Member
 
Joined: Dec 2009
Posts: 172
Likes: 0
From: Tampa FLA
Year: 93
Model: Cherokee
Engine: 4.0
Default

Originally Posted by donnmcc
That's what my rattle was.
Mine too
Old 12-27-2009 | 08:14 PM
  #8  
guest02's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 629
Likes: 0
Model: Cherokee
Default

Originally Posted by arsxj
Mine too
Mine too!!!

Might consider replacing it after i replace my Header next week-end...
Old 12-28-2009 | 09:56 AM
  #9  
Mike H.'s Avatar
Senior Member
 
Joined: Sep 2008
Posts: 680
Likes: 2
From: Phoenix AZ
Year: 1997
Model: Cherokee
Engine: I6ho
Default

so when your catalytic converter was ratteling, if you pulled up on the t-case shifter it went away... ?
I find that hard to believe...
Old 12-28-2009 | 01:09 PM
  #10  
gpXJ's Avatar
CF Veteran
 
Joined: Sep 2009
Posts: 1,142
Likes: 2
From: Grand Prairie, Texas
Year: 1998
Model: Cherokee
Engine: 4.0 HO I6
Default

I have this exact same rattle. I can hold the t-case shifter and it stops, but goes right back to rattling when I let go... Will look into that linkage fix kit. Thanks Mike!
Old 12-28-2009 | 05:40 PM
  #11  
Mike H.'s Avatar
Senior Member
 
Joined: Sep 2008
Posts: 680
Likes: 2
From: Phoenix AZ
Year: 1997
Model: Cherokee
Engine: I6ho
Default

the kit is a dealer item... FWIW
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
10-27-2024 12:13 PM
pmd1995
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-29-2017 07:58 AM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
11-06-2015 09:16 AM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-30-2015 01:34 PM
Juan2387
Modified XJ Cherokee Tech
0
09-25-2015 01:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Rattle at Idle



All times are GMT -5. The time now is 02:39 PM.