Rear differential pinion seal
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Fort Worth, TX
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Rear differential pinion seal
Okay so im getting ready to replace the pinion seal on the rear diff in my 95 cherokee. However my question is, i know I have a dana 35c rear end but im not sure exactly which seal I should purchase. Would this one be the correct seal?
Or is it this one?
http://www.oreillyauto.com/site/c/de...rd=pinion+seal
Thanks for any help in advance guys
Or is it this one?
http://www.oreillyauto.com/site/c/de...rd=pinion+seal
Thanks for any help in advance guys
#4
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
Same part ! One has a lip on it the other doesn't.
The first one with lip would be easier to install if you have never done it it has more area to smack it in to seat it.
The first one with lip would be easier to install if you have never done it it has more area to smack it in to seat it.
#5
Seasoned Member
How bad is it leaking? This axle uses a crush sleeve for pinion preload. To measure it correctly the axle shafts must be removed. Sadly I have seen guys do more damage than good when changing these seals.
Ron
Ron
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)