Rear main seal stuck
#1
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 84
Likes: 0
From: Grand Haven, Mi
Year: 1990
Model: Cherokee
Engine: 4.0
Rear main seal stuck
I can't get the upper seal out. I saw that some people loosened some of the other bolts on the crank to give it some room to move. Does that work? If so what do I torque those back to? And do I torque them then put the new upper seal in? Or put the seal in then torque them?
Thanks!
Thanks!
#2
Member
Joined: Jul 2009
Posts: 188
Likes: 0
From: Los Angeles CA
Year: 1998
Model: Cherokee
Engine: 4.0L 6 Cyl
What are you using to push it out? I was using too small of a hammer for a while. I thought it was stuck too. i Used a heavier one and I pushed it out very easily after that with just one hit.
#3
Member
Joined: Jul 2009
Posts: 188
Likes: 0
From: Los Angeles CA
Year: 1998
Model: Cherokee
Engine: 4.0L 6 Cyl
I can't get the upper seal out. I saw that some people loosened some of the other bolts on the crank to give it some room to move. Does that work? If so what do I torque those back to? And do I torque them then put the new upper seal in? Or put the seal in then torque them?
Thanks!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)