Recommend a Manual - I want to know everything about my Jeep
#16
I
I just want to know all the parts for my front and rear doors. Every single part, all the way down to the bolts and nuts needed for the window regulators, bolts that hold the door panel, etc. You see, I have the window regulators and door panels, but I do not have the hardware to mount them. Yes, just the nuts and bolts.
If I knew the length, thread pitch, diameters, I could probably look for hardware that is compatible.
I just want to know all the parts for my front and rear doors. Every single part, all the way down to the bolts and nuts needed for the window regulators, bolts that hold the door panel, etc. You see, I have the window regulators and door panels, but I do not have the hardware to mount them. Yes, just the nuts and bolts.
If I knew the length, thread pitch, diameters, I could probably look for hardware that is compatible.
It will require you to download the relevant manuals from the (2nd) link I gave, and look right thru it. fastener sizes are often right at the back.
I am too lazy to do this right now. Sometimes it is not in there, in which case ur probably out of luck.
My Cherokee has a weird mix of Imperial and Metric threads!!
I have a spare '96, and cannibalised many fasteners (and other bits) of a wreck
take the other side one to the shop and tell them to give u same
#17
I thank you all for your recommendations. Unfortunately, I still have not found what I am looking for.
Maybe I am looking in the wrong place, meaning maybe I am looking for a manual and should be looking for a paper.
I just want to know all the parts for my front and rear doors. Every single part, all the way down to the bolts and nuts needed for the window regulators, bolts that hold the door panel, etc. You see, I have the window regulators and door panels, but I do not have the hardware to mount them. Yes, just the nuts and bolts.
And I have a bolt missing in the read hatch mount. Obviously I am looking for a bolt replacement without having to buy the whole thing.
If I knew the length, thread pitch, diameters, I could probably look for hardware that is compatible.
Thanks again guys for the reply posts!!
Maybe I am looking in the wrong place, meaning maybe I am looking for a manual and should be looking for a paper.
I just want to know all the parts for my front and rear doors. Every single part, all the way down to the bolts and nuts needed for the window regulators, bolts that hold the door panel, etc. You see, I have the window regulators and door panels, but I do not have the hardware to mount them. Yes, just the nuts and bolts.
And I have a bolt missing in the read hatch mount. Obviously I am looking for a bolt replacement without having to buy the whole thing.
If I knew the length, thread pitch, diameters, I could probably look for hardware that is compatible.
Thanks again guys for the reply posts!!
#18
You could always take the fasteners you do have to the hardware store and match them up. But, seeing as i have a parts catalog i did some digging. This is all for the inner door panel. Taken from the 97-98 parts catalog.
Door handle screw M4x7x16
Door panel armrest screw .250x14x1.772, pan head tapping
Door panel clips (part #6504 014)
Side mirror trim screw .164-18x.625
Regulator to door screws (power and manual) M6x1x12
Glass to regulator screw (front doors) M6x1.00x16, hex flange head
Glass to regulator screws (rear door) M6
Liftgate hinge screws*
There are two call outs for the hinge screws in the catalog. One is M8-1.25x22.00, screw and washer, hex head. It says you need 10. The other is M8x1.25x25, screw and washer, hex head. No quantity is given.
Door handle screw M4x7x16
Door panel armrest screw .250x14x1.772, pan head tapping
Door panel clips (part #6504 014)
Side mirror trim screw .164-18x.625
Regulator to door screws (power and manual) M6x1x12
Glass to regulator screw (front doors) M6x1.00x16, hex flange head
Glass to regulator screws (rear door) M6
Liftgate hinge screws*
There are two call outs for the hinge screws in the catalog. One is M8-1.25x22.00, screw and washer, hex head. It says you need 10. The other is M8x1.25x25, screw and washer, hex head. No quantity is given.
#19
Thread Starter
Junior Member
Joined: Jan 2015
Posts: 55
Likes: 2
From: The Hot Southwest
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0 Straight 6
You could always take the fasteners you do have to the hardware store and match them up. But, seeing as i have a parts catalog i did some digging. This is all for the inner door panel. Taken from the 97-98 parts catalog.
Door handle screw M4x7x16
Door panel armrest screw .250x14x1.772, pan head tapping
Door panel clips (part #6504 014)
Side mirror trim screw .164-18x.625
Regulator to door screws (power and manual) M6x1x12
Glass to regulator screw (front doors) M6x1.00x16, hex flange head
Glass to regulator screws (rear door) M6
Liftgate hinge screws*
There are two call outs for the hinge screws in the catalog. One is M8-1.25x22.00, screw and washer, hex head. It says you need 10. The other is M8x1.25x25, screw and washer, hex head. No quantity is given.
Door handle screw M4x7x16
Door panel armrest screw .250x14x1.772, pan head tapping
Door panel clips (part #6504 014)
Side mirror trim screw .164-18x.625
Regulator to door screws (power and manual) M6x1x12
Glass to regulator screw (front doors) M6x1.00x16, hex flange head
Glass to regulator screws (rear door) M6
Liftgate hinge screws*
There are two call outs for the hinge screws in the catalog. One is M8-1.25x22.00, screw and washer, hex head. It says you need 10. The other is M8x1.25x25, screw and washer, hex head. No quantity is given.
Thread
Thread Starter
Forum
Replies
Last Post
benevolentelephant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
05-14-2016 07:07 PM
scrubxjowner
Modified XJ Cherokee Tech
48
10-20-2014 11:07 PM
muddy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
06-22-2010 01:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)