renix problems!!! new to the fourm
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
renix problems!!! new to the fourm
<p>hey guys bought my first xj!!! Its an 89 Cherokee limited. I've adjusted the tpa to spec, fixed my exhaust leaks from the slip joints, hate slip joints lol. Had to install new vacuum harness, new sway bar links, new steering damper. Ok that's what I've started with so far as well as ground refreshing! What's really bugging me is my idle, it sits at about 550 in drive, higher in park, but when I put in drive is when it drops. I really want to fix it, it runs fine just low idle, I'm thinking its the iac but any help would be great! I live In Colorado, read plenty forums, nothing matches. Also have a new o2!</p><p>thanks everyone</p><p>joe</p>
#2
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
i really need a direction to go because it will sit perfect ay start up but as soon as i drive it and put it back in park the idle stays low... Extra info if that helps. Always starts and never dies out. I have read that that idle is fine but i need someone to ok it....
#3
CF Veteran
#11
https://www.cherokeeforum.com/f51/cr...x-tips-153657/
I know when my IAC started going out I would have to give it some throttle to start it. Ran fine and never stalled but always idled low. Should idle at around(600-700). Cleaning it,the throttle body, and the CTS(code 22) fixed it but it wasn't long before I had to replace the IAC. All's good now.
https://www.cherokeeforum.com/f51/cr...x-tips-153657/
I know when my IAC started going out I would have to give it some throttle to start it. Ran fine and never stalled but always idled low. Should idle at around(600-700). Cleaning it,the throttle body, and the CTS(code 22) fixed it but it wasn't long before I had to replace the IAC. All's good now.
Last edited by EZEARL; 06-07-2014 at 03:43 PM.
#4
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
<p>thanks for the info, I'm working atm. But all of it has been cleaned, on start up it changes as far as how long the cranking wants to take, some times 3 or 5 seconds, she runs well though. Exhaust smells very clean when warm. But I will take a look at it. Can an egr valve cause low idle?</p>
#7
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,562 Likes
on
1,266 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
1,3,4, and 5 before doing anything else.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
thanks for the info. My friends say my jeeps engine is the cleanest thing they have seen. Not to mention the splices have already been takin care of. Let me know what you think.
thanks joe
Last edited by Dynamic; 06-10-2014 at 03:55 PM.
#9
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,562 Likes
on
1,266 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Who the hell is old man remix?
#11
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
excuse me wrong person, its ecomike on naxja forum! I believe old man is on naxja aswell. But does anyone know how or where to test the iac harness?
#12
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
http://www.naxja.net/forum/showthrea...ht=renix+files
this is where I'm at but ecomike found out his was the iac and never did get a diagnosis for test the harness or switch..... So does anyone know the answer?
this is where I'm at but ecomike found out his was the iac and never did get a diagnosis for test the harness or switch..... So does anyone know the answer?
#13
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,562 Likes
on
1,266 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
http://www.naxja.net/forum/showthrea...ht=renix+files
this is where I'm at but ecomike found out his was the iac and never did get a diagnosis for test the harness or switch..... So does anyone know the answer?
this is where I'm at but ecomike found out his was the iac and never did get a diagnosis for test the harness or switch..... So does anyone know the answer?
Of the Renix Tips listed below, which have you performed in the group 1 through 5?
#14
Junior Member
Thread Starter
Join Date: Jun 2014
Location: wheatridge, colorado!!!
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
cruiser, I'm sorry it sounds like I'm trying to skip steps because I'm not. I work a ton and have about 1 day off a week. Tomorrow is my day off, I am trying to get everything I need together so I can do this all tonight into tomorrow. I have not been able to go through the one through five steps yet. But have done a few ground refreshings. The only ground I've had a hard time finding is the dipstick one. I don't see it.... I see the one next to it on the block and have cleaned it. The po did number six, I checked. Which leads me to believe others have been done. I will be getting to work on it alittle after nine tonight. And will post my findings.
thanks
joe
thanks
joe
#15
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,562 Likes
on
1,266 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
NEVER trust a Previous Owner and assume nothing. Do it yourself!!!