Are rocker panels the same size for 2 door models as for 4 door models?
06-24-2012 | 02:18 PM
#1
Thread Starter
Seasoned Member
Joined: Aug 2008
Posts: 425
Likes: 0
From: Illinois
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Are rocker panels the same size for 2 door models as for 4 door models?
I have a two door that needs new rocker panels and I cannot find the answer to this question. Some rockers that I see say "for 4 door models" so I am just not sure. I am also not interested in doing that whole welded in steel box thing unless I can find the steel for dirt cheap.
Also, if you know where I can find some 2 door rockers that will fit a '98 for cheap, please let me know.
Thanks for any help
Also, if you know where I can find some 2 door rockers that will fit a '98 for cheap, please let me know.
Thanks for any help
06-24-2012 | 02:51 PM
#2
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
I'm guessing the rockers for the 4 doors have thr molding for the door pillars and the 2 doors do not.
A real easy solution that most end up doing is the 2x4 or 2x6 square tube replacement.
You weld in the square tube in place of the rocker and it doubles as a slider.
A real easy solution that most end up doing is the 2x4 or 2x6 square tube replacement.
You weld in the square tube in place of the rocker and it doubles as a slider.
06-24-2012 | 11:28 PM
#3
CF Veteran
Joined: Apr 2012
Posts: 5,302
Likes: 21
From: Wisconsin
Model: Cherokee
Classic2Current makes them for just about any Mopar product. You might contact them:
http://www.c2cfabrication.com/
http://www.c2cfabrication.com/
Last edited by Radi; 06-24-2012 at 11:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
John T
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-19-2022 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)