Seat swap questions
#1
Senior Member
Thread Starter
Seat swap questions
I found a set of seats from a 1990 that are in really good condition for my 2 door, and I have my doubts about swapping over the brackets from my 95 seats to the 90 seats. I found people saying that the brackets swap over, and I’ve found people saying they don’t without additional fabrication. Can anyone tell me why or why not they won’t swap over?
The following users liked this post:
That Jeep Guy XJMJ (11-04-2023)
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I'm not 100% sure, but didn't the seat bases change in the front when the body style changed in 1997?
#4
Senior Member
Thread Starter
Okay. The seat bases are the same from 84-94 1/2. Some 95’s had the old design, but most after 94 have the raised seat brackets. The design of the 84-94 seats are different from the 95+ seats, and those brackets will not swap over from seat to seat.
However, there are brackets online that are able to adapt a 94 and older seat to a 95+ XJ. And as far as I can tell, the ZJ seats can swap over from the entire production period into an XJ by swapping the brackets if you have a 95+, and the seats from 95-01 are interchangeable as far as I can tell.
However, there are brackets online that are able to adapt a 94 and older seat to a 95+ XJ. And as far as I can tell, the ZJ seats can swap over from the entire production period into an XJ by swapping the brackets if you have a 95+, and the seats from 95-01 are interchangeable as far as I can tell.
The following users liked this post:
wma (07-16-2024)
#5
Senior Member
Thread Starter
If anyone is wondering, I cannot find a bracket to adapt a 84-94 seat to a 95+. I thought they existed, but most are to adapt aftermarket seats to the floor pan. If you want to swap in earlier seats to a later XJ, you’ll have to remove the seat riser. I’m not sure of where the seat goes, but if anyone could send me pictures of a 94 and earlier floor pan in an XJ, that would be awesome
#6
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,287
Received 346 Likes
on
289 Posts
Year: 1987 MJ, 1973 J2000, 1986 XJ, 08 JK
Model: Comanche (MJ)
Engine: 4.0L H.O
They do make replacement front seat mounts for the 95+ setup. Soo converting your older jeep to a newer seat doesn't have to be soo involved with adapting old lowers to newer upper bits.
Requires welding and depending on how clean you want your carpet looking a carpet swap as well but in comparison to some booty setups ive seen over the years for brackets and such this is a rather simple solution if you have the means to do soo yourself
Requires welding and depending on how clean you want your carpet looking a carpet swap as well but in comparison to some booty setups ive seen over the years for brackets and such this is a rather simple solution if you have the means to do soo yourself
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)