Switching to Rotella 15w40
#46
Member
Join Date: Sep 2009
Location: Albany/Saratoga, NY
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999 Stone White
Model: Cherokee
Engine: 4.0
Nice read. There is a lot more to a viscosity measurement than pouring a fluid out of a tube. I have measured many different silicone fluids and brake fluids with and without fillers, and between -50c to 200c using a viscometer. To get reliable and accurate data requires much more than mythbuster techniques. There was no mention of a viscometer in the entire article. Naming your equipment and test procedure is engineering research 101. I couldn't publish a paper or write a patent if I didn't disclose my testing parameters.
His data on "zone of protection" is questionable. Saying that 15w40 doesn't protect until 120C is incorrect. As a designed diesel oil, I think engineers would use an oil that would protect a diesel engine at operating temperatures which is lower than gasoline engine operating temperatures. So either he's wrong or the entire trucking industry should switch to 0w20. Could this perhaps be only legitimate data for a corvair? I also find it interesting that formulation AND manufacturer AND SAE rating seem to combine to give the actual viscosity. Too bad he didn't test RotellaT 15w40 or syn 5w40. If anything that has convinced me to run the Rotella syn 5W40 all year round.
Light oils produce better mileage. If you can adequately protect your engine (and it was designed for) a light oil, go for it. I use mobile1 5w20 in my car.
His data on "zone of protection" is questionable. Saying that 15w40 doesn't protect until 120C is incorrect. As a designed diesel oil, I think engineers would use an oil that would protect a diesel engine at operating temperatures which is lower than gasoline engine operating temperatures. So either he's wrong or the entire trucking industry should switch to 0w20. Could this perhaps be only legitimate data for a corvair? I also find it interesting that formulation AND manufacturer AND SAE rating seem to combine to give the actual viscosity. Too bad he didn't test RotellaT 15w40 or syn 5w40. If anything that has convinced me to run the Rotella syn 5W40 all year round.
Light oils produce better mileage. If you can adequately protect your engine (and it was designed for) a light oil, go for it. I use mobile1 5w20 in my car.
#48
Seasoned Member
Join Date: Jan 2011
Location: Charlotte, NC
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by jth877
Nice read. There is a lot more to a viscosity measurement than pouring a fluid out of a tube. I have measured many different silicone fluids and brake fluids with and without fillers, and between -50c to 200c using a viscometer. To get reliable and accurate data requires much more than mythbuster techniques. There was no mention of a viscometer in the entire article. Naming your equipment and test procedure is engineering research 101. I couldn't publish a paper or write a patent if I didn't disclose my testing parameters.
His data on "zone of protection" is questionable. Saying that 15w40 doesn't protect until 120C is incorrect. As a designed diesel oil, I think engineers would use an oil that would protect a diesel engine at operating temperatures which is lower than gasoline engine operating temperatures. So either he's wrong or the entire trucking industry should switch to 0w20. Could this perhaps be only legitimate data for a corvair? I also find it interesting that formulation AND manufacturer AND SAE rating seem to combine to give the actual viscosity. Too bad he didn't test RotellaT 15w40 or syn 5w40. If anything that has convinced me to run the Rotella syn 5W40 all year round.
Light oils produce better mileage. If you can adequately protect your engine (and it was designed for) a light oil, go for it. I use mobile1 5w20 in my car.
His data on "zone of protection" is questionable. Saying that 15w40 doesn't protect until 120C is incorrect. As a designed diesel oil, I think engineers would use an oil that would protect a diesel engine at operating temperatures which is lower than gasoline engine operating temperatures. So either he's wrong or the entire trucking industry should switch to 0w20. Could this perhaps be only legitimate data for a corvair? I also find it interesting that formulation AND manufacturer AND SAE rating seem to combine to give the actual viscosity. Too bad he didn't test RotellaT 15w40 or syn 5w40. If anything that has convinced me to run the Rotella syn 5W40 all year round.
Light oils produce better mileage. If you can adequately protect your engine (and it was designed for) a light oil, go for it. I use mobile1 5w20 in my car.
#49
CF Veteran
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
First I will say that I have no scientific basis for what I am about to say so I'm sure there is nothing to it. But all I can say is both me and the guy I work with started running 15w40 oil in our vehicles because we got it pretty much for free (My 94 XJ and his 89 Town Car) and we both had our head gaskets go out within 6 months.
#50
Junior Member
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
I worked for a big truck fleet from 88 till 07 we ran various brands of 15-40 in all of our support veichles over the years and never had any motor problems. we had mostly ford 4.0 straight sixes and 302s some chevys and 1 nissan some of them had close to 300.000 on them . im switching over on my next oil change on my truck i just changed the oil in my 69 rr sounds fine . another thing ive learned over the years with this weight of oil it will protect the motor when overheated where thin oil usually wont.
#51
CF Veteran
Join Date: Mar 2011
Location: South Bend, IN
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.6 stroker
Lots of good info. Didn't have time to read full detail but I seem in the begining talk on zinc. To bring your zinc levels back up ad a bottle of blue STP oil additive. It has enough to bring your zinc levels back up to where they were back in the 60's era oil
Last edited by EVILXJ; 04-07-2011 at 08:21 PM.
#52
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Athens, Georgia
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 Inline 6
I think im going to run rotella 5w40 syn and a puralator filter, still open to suggestions! lets keep this thread going, its very informative
#53
CF Veteran
Join Date: Nov 2009
Location: The Republic of TEXAS
Posts: 8,172
Likes: 0
Received 15 Likes
on
15 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L HO
Like the good Dr. said, the 1st number is more important than the 2nd. 0W40, 5W40, 10W40, 15W40 and 40W are the same vis at operating temp.
Last edited by djb383; 04-07-2011 at 08:45 PM.
#54
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Athens, Georgia
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 Inline 6
#55
Seasoned Member
Join Date: Jan 2011
Location: Charlotte, NC
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by ACCoffroad
I think im going to run rotella 5w40 syn and a puralator filter, still open to suggestions! lets keep this thread going, its very informative
#56
Member
Join Date: Sep 2009
Location: Albany/Saratoga, NY
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999 Stone White
Model: Cherokee
Engine: 4.0
Good choice. Keep in mind that even though some argue that ZDDP is not needed in an engine that is already broken in, I would say that it is still needed- at least in smaller amounts as a general anti wear additive. Just about all major car motor oils (not diesel) do not have zinc in them anymore. Thank the tree huggers for that.
#58
Seasoned Member
Join Date: Jan 2011
Location: Charlotte, NC
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Good choice. Keep in mind that even though some argue that ZDDP is not needed in an engine that is already broken in, I would say that it is still needed- at least in smaller amounts as a general anti wear additive. Just about all major car motor oils (not diesel) do not have zinc in them anymore. Thank the tree huggers for that.
Uhhhhh... I may suggest you take a look at some VOA's or UOA's before making the statement that "Just about all Major car motor oils (not diesel) do not have zinc in them anymore." Click the link in my signature for bobistheoilguy forum thats a direct link to there VOA forum.
VOA= Virgin Oil Analysis
UOA= Used Oil Analysis
I do not know of any motor oil company that does not have Zinc in their fluid. Lower levels absolutely but they make up for it in Moly, Titanium, etc.. I love a great oil discussion so let me know if you have any other questions.
#59
Senior Member
Join Date: Aug 2009
Location: Effingham, N.H.
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I worked for a big truck fleet from 88 till 07 we ran various brands of 15-40 in all of our support veichles over the years and never had any motor problems. we had mostly ford 4.0 straight sixes and 302s some chevys and 1 nissan some of them had close to 300.000 on them . im switching over on my next oil change on my truck i just changed the oil in my 69 rr sounds fine . another thing ive learned over the years with this weight of oil it will protect the motor when overheated where thin oil usually wont.
#60
Member
Join Date: Sep 2009
Location: Albany/Saratoga, NY
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999 Stone White
Model: Cherokee
Engine: 4.0
Uhhhhh... I may suggest you take a look at some VOA's or UOA's before making the statement that "Just about all Major car motor oils (not diesel) do not have zinc in them anymore." Click the link in my signature for bobistheoilguy forum thats a direct link to there VOA forum.
VOA= Virgin Oil Analysis
UOA= Used Oil Analysis
I do not know of any motor oil company that does not have Zinc in their fluid. Lower levels absolutely but they make up for it in Moly, Titanium, etc.. I love a great oil discussion so let me know if you have any other questions.
VOA= Virgin Oil Analysis
UOA= Used Oil Analysis
I do not know of any motor oil company that does not have Zinc in their fluid. Lower levels absolutely but they make up for it in Moly, Titanium, etc.. I love a great oil discussion so let me know if you have any other questions.
So the question is does moly, Ti, etc... fully make up and act the same way ZDDP does for engine lubrication?