Third coolant leak in a month.
#16
CF Veteran
We've all (self included) accidentally done something like that before. Even when trying to be careful, sometimes s*** just happens.
#17
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
oh I agreed. I didn't say the pressure test was a bad idea or not to do it. Just thought I'd toss out a few things that could be easily visually checked in the meantime was all.
We've all (self included) accidentally done something like that before. Even when trying to be careful, sometimes s*** just happens.
We've all (self included) accidentally done something like that before. Even when trying to be careful, sometimes s*** just happens.
#18
CF Veteran
cool.... and no worries mate
I'd have to say on pretty much any project I do myself, especially on older vehicles like my XJ.... I'm always concerned that no matter the precautions I take in soaking bolts with WD40/PB blaster, etc. or heating up with a torch, And take care in how I loosen ones in and around the block, that I'm gonna snap one right off in it and I'll be totally screwed. Especially knowing that a lot of them probably have been in since it was new and never taken out until me trying it.
I'd have to say on pretty much any project I do myself, especially on older vehicles like my XJ.... I'm always concerned that no matter the precautions I take in soaking bolts with WD40/PB blaster, etc. or heating up with a torch, And take care in how I loosen ones in and around the block, that I'm gonna snap one right off in it and I'll be totally screwed. Especially knowing that a lot of them probably have been in since it was new and never taken out until me trying it.
#19
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
cool.... and no worries mate
I'd have to say on pretty much any project I do myself, especially on older vehicles like my XJ.... I'm always concerned that no matter the precautions I take in soaking bolts with WD40/PB blaster, etc. or heating up with a torch, And take care in how I loosen ones in and around the block, that I'm gonna snap one right off in it and I'll be totally screwed. Especially knowing that a lot of them probably have been in since it was new and never taken out until me trying it.
I'd have to say on pretty much any project I do myself, especially on older vehicles like my XJ.... I'm always concerned that no matter the precautions I take in soaking bolts with WD40/PB blaster, etc. or heating up with a torch, And take care in how I loosen ones in and around the block, that I'm gonna snap one right off in it and I'll be totally screwed. Especially knowing that a lot of them probably have been in since it was new and never taken out until me trying it.
Like what you share here, This is just another example of why one is better off just going through the extra time and motions right from the beginning or it will probably cost you much much more time and work in the end because you didn't. In the case of these Trucks... I had Dispatchers yelling at me to get it rolling, I had the driver yelling at me because the dispatcher was yelling at him, and I had my regional manager yelling at me all at the same time. Nope... slow down guys...or this truck will be down much much longer if I have to drill all these out.
"But the driver says you aren't even working on it!" Nope... the bolts are cooling back down, then I will have it together and rolling out in 5 minutes. lol
#20
CF Veteran
I worked for a company who owned nothing but Peterbilts with the ISX Cummins. Cummins I6 engines have a multi-piece exhaust manifold system that had issues with cracking and sections needed replacing quite regularly. The temp difference between the head and the exhaust sections would shear the bolts inside but yet leave them in place still holding the manifold. It didn't take me long to realize you better just not even try to remove these bolts at all without first taking the time to heat these and let them cool down again or everyone of them will snap coming off.
Like what you share here, This is just another example of why one is better off just going through the extra time and motions right from the beginning or it will probably cost you much much more time and work in the end because you didn't. In the case of these Trucks... I had Dispatchers yelling at me to get it rolling, I had the driver yelling at me because the dispatcher was yelling at him, and I had my regional manager yelling at me all at the same time. Nope... slow down guys...or this truck will be down much much longer if I have to drill all these out.
"But the driver says you aren't even working on it!" Nope... the bolts are cooling back down, then I will have it together and rolling out in 5 minutes. lol
Like what you share here, This is just another example of why one is better off just going through the extra time and motions right from the beginning or it will probably cost you much much more time and work in the end because you didn't. In the case of these Trucks... I had Dispatchers yelling at me to get it rolling, I had the driver yelling at me because the dispatcher was yelling at him, and I had my regional manager yelling at me all at the same time. Nope... slow down guys...or this truck will be down much much longer if I have to drill all these out.
"But the driver says you aren't even working on it!" Nope... the bolts are cooling back down, then I will have it together and rolling out in 5 minutes. lol
It's a wonderful world of those in charge being the same ones that have absolutely no clue how the work should be completed correctly in the first place.
yeah... I like to get things done on my vehicles as efficiently as I can...but I also know from years of experience that rushing it will only make it a much longer project than it would've been in the first place. For ones that are really stubborn, I've even soaked them overnight. And boom, the next day, they come off like butter instead of broken off in the head, block or other PITA place to repair a broken one. (assuming it's one that I can't get in there to heat up a little...or would be unwise to do so)
#21
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Just gotta love the literal ton of BS that comes with the corporate automotive repair/maint. world. It's like, "I can give it to ya when you want it... but 5 miles down the road the wheels will fall off... or you can just stick a cork in it, let me fix it right and you won't have to get it fixed a 2nd time."
It's a wonderful world of those in charge being the same ones that have absolutely no clue how the work should be completed correctly in the first place.
yeah... I like to get things done on my vehicles as efficiently as I can...but I also know from years of experience that rushing it will only make it a much longer project than it would've been in the first place. For ones that are really stubborn, I've even soaked them overnight. And boom, the next day, they come off like butter instead of broken off in the head, block or other PITA place to repair a broken one. (assuming it's one that I can't get in there to heat up a little...or would be unwise to do so)
It's a wonderful world of those in charge being the same ones that have absolutely no clue how the work should be completed correctly in the first place.
yeah... I like to get things done on my vehicles as efficiently as I can...but I also know from years of experience that rushing it will only make it a much longer project than it would've been in the first place. For ones that are really stubborn, I've even soaked them overnight. And boom, the next day, they come off like butter instead of broken off in the head, block or other PITA place to repair a broken one. (assuming it's one that I can't get in there to heat up a little...or would be unwise to do so)
#22
CF Veteran
Join Date: Feb 2012
Location: central IN
Posts: 2,282
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1997
Engine: 4.0
once the radiator on mine got replaced the radiator cap began leaking. i replace the cap about once every 18 months as it will take to a random leak. idk wtf but whatever. lower quality rad i’m guessing.
#25
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
The underside of the brass button check valve needs periodic cleaning. I don't know how, but stuff gets built up under that button and keeps it from sealing against the rubber correctly.
#26
CF Veteran
Join Date: Feb 2012
Location: central IN
Posts: 2,282
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1997
Engine: 4.0
ill stop hyjacking ole boys thread now.
#27
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
i had considered this and cleaned them and dressed the rubber seal. i don’t think that’s the issue. the cap on it now from the parts jeep is a rusty, crusty pos but it doesn’t leak. ive fought this issue since day one and i’m at a loss.
ill stop hyjacking ole boys thread now.
ill stop hyjacking ole boys thread now.
#28
CF Veteran
That's what's on mine and haven't had issues with it yet... Don't know if that's a good or bad thing..but so far so good. That's what the PO had on it and it seals fine. But thinking that's too high... am I wrong?
What's the official data on what pressure rating as to what SHOULD be on our XJ's?
What's the official data on what pressure rating as to what SHOULD be on our XJ's?
#29
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 18 Likes
on
14 Posts
Year: 97
Model: Cherokee
Engine: 4.0
That's what's on mine and haven't had issues with it yet... Don't know if that's a good or bad thing..but so far so good. That's what the PO had on it and it seals fine. But thinking that's too high... am I wrong?
What's the official data on what pressure rating as to what SHOULD be on our XJ's?
What's the official data on what pressure rating as to what SHOULD be on our XJ's?
Thread
Thread Starter
Forum
Replies
Last Post
taythegibs
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
03-02-2011 10:50 AM
2001XJ808
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2009 03:42 PM
mkrebs86
Other Vehicles. Other Jeep models & cars and trucks of other makes
9
08-12-2008 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)