Timing question 87 Cherokee 4.0
08-14-2011 | 12:57 PM
#1
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 32
Likes: 0
Model: Cherokee
Timing question 87 Cherokee 4.0
I have a Sunpro CP7519 that I bought years ago and can't find the manual. I'm somewhat familiar with hooking up a timing light and checking the timing. This timing light has a dial on it and I'm not sure where to set it when I'm checking the timing. The other thing I can find is what is the timing spec for this engine 87 Cherokee 4.0. Any input appreciated.
08-14-2011 | 01:31 PM
#2
CF Veteran
Joined: Jun 2011
Posts: 2,858
Likes: 0
From: Nor-Cal
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
The timing is set by the computer. Turn the jeep on with the light hooked up and point it. Slowly turn the dial until the pointer hits zero. That will give you the timing. Not sure what Tue baseline is but I would guess between 7* and 10*
08-14-2011 | 02:30 PM
#3
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,566
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Every Renix era XJ I've ever monitored the timing on with my DRB showed 12* at idle.
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
05-05-2024 11:29 PM
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 08:52 PM
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 01:02 PM
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-26-2019 07:30 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-22-2015 02:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)