Transfer case help
#16
Member
Thread Starter
Join Date: Dec 2009
Location: Mid MO
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99xj 97TJ 96XJ, 87 woody
Model: Cherokee
Engine: 4.0L
Here is a pic of my ball joint housing with cup that will not remove.
Top is left is old ball
Bottom is new ball insert with cup
Right is Spicer C2-83-219
Top is left is old ball
Bottom is new ball insert with cup
Right is Spicer C2-83-219
#18
Member
Thread Starter
Join Date: Dec 2009
Location: Mid MO
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99xj 97TJ 96XJ, 87 woody
Model: Cherokee
Engine: 4.0L
I will try it with out the drive shaft installed. Then again the case would not be under load.
#20
Member
Thread Starter
Join Date: Dec 2009
Location: Mid MO
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99xj 97TJ 96XJ, 87 woody
Model: Cherokee
Engine: 4.0L
I drove it in 4 lo without front drive shaft and no noise. I went back to local auto parts store and they had a precision 607 in stock for 42.95 ball and socket ball by itself was 25.95. The precision joint is greasable unlike the spicer. I know everyone loves spicer but have not had a problem precision.
#21
Member
Thread Starter
Join Date: Dec 2009
Location: Mid MO
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99xj 97TJ 96XJ, 87 woody
Model: Cherokee
Engine: 4.0L
I have fixed my noise that was a result of a bad ball and socket joint that makes up the double cardon joint by the transfer case.
I was able to rebuild the entire drive shaft with new joints from my local American auto Supply store.
They had a much better price than Oreilly
To rebuild the shaft here is my parts list:
part part #
cost
ball u joint Precsion 607
47.71
U joint Precsion 380
14.43
U joint Precsion 380
14.43
U joint Precsion369
9.1
total before tax 85.67
I'm not sure how much a junkyard would charge for a drive shaft. It's a gamble with JY parts. I like to know I can rebuild something and be sure of what I have. I feel it's the built not bought feeling.
I was able to rebuild the entire drive shaft with new joints from my local American auto Supply store.
They had a much better price than Oreilly
To rebuild the shaft here is my parts list:
part part #
cost
ball u joint Precsion 607
47.71
U joint Precsion 380
14.43
U joint Precsion 380
14.43
U joint Precsion369
9.1
total before tax 85.67
I'm not sure how much a junkyard would charge for a drive shaft. It's a gamble with JY parts. I like to know I can rebuild something and be sure of what I have. I feel it's the built not bought feeling.
Last edited by Lowes; 02-24-2012 at 10:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
10-01-2015 02:58 PM
BlvdKreeper
Cherokee Chat
5
10-01-2015 06:34 AM
csspencer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 08:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)