Transfer case question!
#17
Thread Starter
Seasoned Member
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
#18
Thread Starter
Seasoned Member
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Freegdr would this make any difference i just got new tires about a month ago thinking that was the vibe.? just wondering
#21
Where do you feel the vibe, steering wheel? gas/brake pedals? throughout the whole vehicle? all the time or more so at certain speeds? worse under heavy braking? This could be a longshot, replace each wheel with the spare and drive it, youll be checking to see if one of your wheels is warped/damaged from someone possibly zipping on the lugs with a impact,what I mean is someone not making sure the wheel was seated against the hub before they started hammering away with the impact. I know this sounds silly, but it HAS happened. Now this is assuming you have steel wheels of course
#22
Thread Starter
Seasoned Member
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Where do you feel the vibe, steering wheel? gas/brake pedals? throughout the whole vehicle? all the time or more so at certain speeds? worse under heavy braking? This could be a longshot, replace each wheel with the spare and drive it, youll be checking to see if one of your wheels is warped/damaged from someone possibly zipping on the lugs with a impact,what I mean is someone not making sure the wheel was seated against the hub before they started hammering away with the impact. I know this sounds silly, but it HAS happened. Now this is assuming you have steel wheels of course
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)