count me in on this too.... hazards work fine all lights work fine, but the turn signal nothing happens. no lights no clicking no nothing. checked under the dash and only found the hazard flasher relay. checked every fuse box and all fuses are good... i need help finding the turn signal flasher - 99 cherokee sport lmk

 

I have a 99 cherokee and what i found on mine is if i push the hazard switch toward the dash board (away from seat, not left or right. but Forward) the blinkers and hazards will stop working on the dash and exteior lights . If i pull the hazard switch back towards me, all the lights will work again. It prolly needs to be cleaned. It may or may not help you, but just a thought.

-Mike

 

Problem Solved!!!

I have been having the same problem on my 2000 Jeep Cherokee Classic, but mine started with the turn signals only registering a few flashes and then they stopped, on some days. Other days they would work perfect.

Two days ago they completely stopped working. Brought the jeep to Sears and they replaced (on the invoice) the "flasher LP, item number 02811936". The part is a grey plastic cube about 1 in. on all sides, it has five prongs on it, with the back with the top line having 56021551, the next line having TBB89 50732, and the third line reading 3 (6) x 32CP-12V.

Sears charged me $35 for the part and $40 for labor.

I hope this helps everyone!

 

So today I was driving home and I had no turn signals or hazard lights all of the fuses are brand new the bulbs are brand new and the turn signal relay is brand new and still nothing but if I wiggle the relay it will work but as soon as I let go of it, it stops working again I have no idea on how to fix this