u-bolt size?
#3
Thread Starter
Seasoned Member
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
well the problem is....its at my buddys house and i need the size cauz im getting a RC lift but he wont get under it to look so now im stuck tryin to figure it out with no luck..
#6
The ABS question only gives a definite answer if he has it. With ABS it is a Dana 35 axle, without ABS it could be either the Dana 35 or the Chrysler 8.25. So if you do not have ABS, there is absolutely no way for us to tell you what kind of axle you have without a pic.
Trending Topics
#8
Senior Member
Joined: Jun 2009
Posts: 670
Likes: 0
From: Central Pennsylvania
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
Only way to tell is to figure out which rear end you have. I have found that Chrysler is more common. Absent knowing for sure, if you get Chrysler and need the Dana ones, I have a set that came with my RC kit I would trade. It would be through the mail, but I'd be willing.
Only modified Cherokee's have any other brake set up. there is no way to know without looking, I believe Dana has a bolt in diff plug whereas Chrysler has a rubber plug
Only modified Cherokee's have any other brake set up. there is no way to know without looking, I believe Dana has a bolt in diff plug whereas Chrysler has a rubber plug
#13
Senior Member
Joined: Jun 2009
Posts: 670
Likes: 0
From: Central Pennsylvania
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
Only way to know is to check the diff, does the plug bolt in or is it rubber or to measure, Dana has 2.62 axle housing diameter, Chrysler has 3 inch.