upper control arms
09-21-2010 | 11:25 PM
#1
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
upper control arms
how do i remove the bolt that holds the control arm onto the axle.. its a 15 mm socket on one side and i cant figure out the other.. its some kind of tab..
can anyone enlighten me?
thanks!
can anyone enlighten me?
thanks!
09-21-2010 | 11:41 PM
#3
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
09-22-2010 | 12:12 AM
#5
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
09-26-2010 | 12:05 PM
#6
Newbie
Joined: Jul 2010
Posts: 4
Likes: 0
Model: Cherokee
that tab is meant to spin untill it hits a wall and then it will hold it in place as u remove the other side.
u dont need to hold it at all.
although you will need needle nose pliers to actuall pull the bolt out.
u have to angle it straight up and then pull the bottom lip out then it should wiggle out.
u dont need to hold it at all.
although you will need needle nose pliers to actuall pull the bolt out.
u have to angle it straight up and then pull the bottom lip out then it should wiggle out.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Busterboy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
04-20-2018 05:38 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-19-2015 07:55 PM
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-06-2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)