what can u do TO your xj for under $50
#31
Senior Member
Join Date: May 2009
Location: Middlesex County CT
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 H.O
You can replace your wiper linkage bushings for under 5 bucks. Stops them from skipping and smacking the trim around the windshield.
#34
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Wow nobodies doing what the thread was started for? everyone says fillin up with gas but ive never known that as a mod... Ive cut my top off and gutted the whole back and carpet out with a $3 sawzall blade... im now splitting 1x1 square tubing to slide over the pinch weld and run all the way back where im plating up the C pillar to make it look nice and to make a handle to get into the back seat... square tube is old off my trailer but buying the plate and trading my buddy at the weldin shop the labor to weld it all up for me since my welder will burn sheet metel up all for a king size matress set i got for free for hauling it away when they got a new sleep number bed... was in my way anyways... ill take pics whenever i get the jeep over there for him to do it... ive got alot more but bout to eat dinner...
#35
I like it in the dirt
Join Date: Jul 2009
Location: Alberta Canada
Posts: 1,802
Likes: 0
Received 1 Like
on
1 Post
Year: 2003
Model: Grand Cherokee
Engine: 4.0
Wow nobodies doing what the thread was started for? everyone says fillin up with gas but ive never known that as a mod... Ive cut my top off and gutted the whole back and carpet out with a $3 sawzall blade... im now splitting 1x1 square tubing to slide over the pinch weld and run all the way back where im plating up the C pillar to make it look nice and to make a handle to get into the back seat... square tube is old off my trailer but buying the plate and trading my buddy at the weldin shop the labor to weld it all up for me since my welder will burn sheet metel up all for a king size matress set i got for free for hauling it away when they got a new sleep number bed... was in my way anyways... ill take pics whenever i get the jeep over there for him to do it... ive got alot more but bout to eat dinner...
#36
Member
Join Date: Apr 2009
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L Inline 6
#37
#41
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
rattle caned everything but the doors so far with some camo light tan, installed 4 hella 500 fog lights i got for free for taking them off a buddies jeep the right way, spent $20 on 2 BFG 31x10.50 AT's with 50% tread on craigslist and installed at buddies shop for free, removable door mod free, pulled fender flares and trimmed about an inch of metal off then rewelded the two pieces back together in the back... used old jigsaw blade and already had welding wire, painted wheels black for $10, had a new single chamber muffler left over from my 70 impala i never used and welded that in the exhaust... think i paid like $30 for it, did the cable (used hood release cable from 98 chevy pickup) front axle lock conversion and got a speaker bar out of a 4 door cherokee... herculined it and got $15 speakers at a clearance warehouse and got a cup holder (junyard parts totalled $20) so not worried bout blown door speakers anymore when doors are on or off, and of course lots of routin maintenance for under $50...
#45
Seasoned Member
Join Date: Apr 2009
Location: gulf shores
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L