Where to add Transmission Temperature Sender
11-16-2023 | 07:54 PM
#16
Thread Starter
CF Veteran
Joined: Dec 2017
Posts: 1,433
Likes: 384
From: San Mateo, CA
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0 Renix, stock.
Hi All:
I got the T55 Socket and removed the transmission plug as pictured in the prior photo. It appears to be metric M14x1.5 thread, with an Oring for sealing. My Temperature gage sender is 1/8th inch pipe thread. I will need an adaptor here, what do you all use? I was thinking of drilling out and tapping the stock T55 bolt to fit the 1/8th inch pipe thread, but there is not enough diameter to allow that. Does someone know of an adaptor for this application?
Thanks!
I got the T55 Socket and removed the transmission plug as pictured in the prior photo. It appears to be metric M14x1.5 thread, with an Oring for sealing. My Temperature gage sender is 1/8th inch pipe thread. I will need an adaptor here, what do you all use? I was thinking of drilling out and tapping the stock T55 bolt to fit the 1/8th inch pipe thread, but there is not enough diameter to allow that. Does someone know of an adaptor for this application?
Thanks!
The following users liked this post:
Spencer_P (11-18-2023)
Thread
Thread Starter
Forum
Replies
Last Post
turbocherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
07-15-2009 02:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)