hello, i recently install an after market stereo. and it turns on fine, but everytime i shut it off it loses memory. it wont remember the time or the stations i put in. i took it took the shop and they also re wired it just incase i didnt do it right. so im guessing its a wire or i burnt out the memory in the system. but can someone tell me which wire should be connected so it has the constant power..

 

get volt meter

 

Don't be a D!(K..

Didn't your mama tell you, if you don't have something nice to say, shut the hell up!!



Back on topic.. We need a little more information please...

What year?
Has factory harness been cut? (bad idea, pigtail is 10 bucks, don't be cheep)
How was it wired?
- Are yellow and red wires from head unit connected together or not?
- have you checked all fuses on yellow (typical memory wire, needs 12v at all times)

 

yes, when i got jeep there wasnt a factory harness.. i was maybe planning on cutting one out of another jeep from a junk yard. but i dont know. and im not sure about the wiring. i will have to look. but could it be a fuse?

 

orange is constant

but yeah, best use a test light or volt meter.

 

what color does orange connect to?

 

Thank you... you beat me to it, I was digging out the other FSM..

IMHO, it would be a good idea to chop a JY harness and do it the correct way.

Check your fuses, connections, wiring.

 

Yellow

 

im going to have to check that out then. and i thought 12v was pink?

 

red from the stereo is 12v in acc and on. yellow is memory

 

oh, so i have to connect orange and yellow to get the memory back?

 

OK!!!
no more confusion...

Constant 12V+ Pink/Yellow
Switched 12V+ Red/White
Ground Black
Illumination Orange/Brown
Dimmer Black/Light Blue
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) Dark Green
Left Front (-) Brown/Red
Right Front (+) Purple
Right Front (-) Dark Blue/Red
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Brown/Yellow
Left Rear (-) Brown/Light Blue
Right Rear (+) Dark Blue/White
Right Rear (-) Dark Blue/Orange


Stereo side...

Yellow - constant 12v
Red- switched 12v
Orange - illumination
Black - ground

 

now that will help.!.. haah. thanks. im going to go do that later.

 

Sorry it took so long..

 

its all good, hopefully i dont blow out any speakers in this process. ha..