Wiring help needed
#1
Newbie
Thread Starter
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I'm doing a double din mod on the MJ we are restoring and we are using the electrical system from a 93 XJ. The issue is we can not use the heater a/c control panel due to how deep that control panel is. So we are using a control panel from a 1999 WJ. The problem with that is we have 3 wires left after hooking everything up. Do these wires need to be plugged in somewhere or can they be deleted? The plug is highlighted in the photo and the wires with no home are the B,D and E wires. E is part of the C43 circuit and there is a C43 wire that is being used in the 1999 control. I'm assuming those left over wires were used in the old setup to... turn on the compressor when in defrost or something like that. The 2nd photo is the 1999 pin layout. I have reached the limits of my understanding with reading these diagrams and blending different systems together.
Help would be greatly appreciated.
Help would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
dublove
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
03-12-2013 09:41 PM
jomps
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
08-11-2012 09:51 PM
CherokeeCountry
Modified XJ Cherokee Tech
3
12-29-2011 03:26 PM
XJeepWerks
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
12-05-2010 04:48 PM
warthog
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-06-2009 09:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)