Won't go into 4 low
11-05-2011 | 09:31 PM
#31
Member
Joined: Nov 2009
Posts: 193
Likes: 0
Year: 1988
Model: Cherokee
Engine: 4.o
If a SYE has been installed enough may not of been grinded of the rod that slides the furthest out and it hits the case. You can pull the nose cone and grind it some with it in the case...From memory, i think there is a smaller cover or filler plug you can remove and see the end of the rod. remove that and see if it helps to
11-10-2011 | 03:55 AM
#32
Member
Joined: Oct 2011
Posts: 168
Likes: 0
From: memphis tenn
Year: 1988
Model: Cherokee
Engine: 4.0
Originally Posted by dbcox
If a SYE has been installed enough may not of been grinded of the rod that slides the furthest out and it hits the case. You can pull the nose cone and grind it some with it in the case...From memory, i think there is a smaller cover or filler plug you can remove and see the end of the rod. remove that and see if it helps to
Thread
Thread Starter
Forum
Replies
Last Post
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
05-23-2024 08:20 AM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-28-2020 06:48 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 04:06 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 10:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)