09-21-2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
11-05-2012, 08:24 PM
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
Go buy the v8 zj tie rods new with the adjusting sleeve.
New "bushings" for tie rod ends are just dust boots.
If you need a new drag link, I'd get a new one unless you find a really nice one at the jy, same for zj tre
New "bushings" for tie rod ends are just dust boots.
If you need a new drag link, I'd get a new one unless you find a really nice one at the jy, same for zj tre
11-05-2012, 08:27 PM
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
so use new V8 ZJ tie rods ends with adjusting sleeves and new boots. and a new draglink...got it.
11-05-2012, 08:30 PM
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
11-05-2012, 08:32 PM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by a_shirey
ok. get them at a parts store or order online for better quality?
11-06-2012, 02:53 PM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by SoCalxJ4.0
I think so, looks like mine. 8.25 has that flat bottom on the front side.
11-06-2012, 06:22 PM
Senior Member
Join Date: Jun 2012
Location: Cuyahoga Falls
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0l
So the front pasenger side sits 1.5" lower than the driver side. Thought suspension was shot. So I installed some new coil springs and shocks today. Didn't make a difference still sits 1.5" off
Anyone have any ideas what it could be
Anyone have any ideas what it could be
11-06-2012, 06:26 PM
CF Veteran
Join Date: Dec 2010
Location: shawnee,ks
Posts: 9,897
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by 94xjohio
So the front pasenger side sits 1.5" lower than the driver side. Thought suspension was shot. So I installed some new coil springs and shocks today. Didn't make a difference still sits 1.5" off
Anyone have any ideas what it could be
Anyone have any ideas what it could be
11-06-2012, 06:30 PM
CF Veteran
Join Date: May 2011
Location: Glendale,Az
Posts: 1,458
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
Originally Posted by 94xjohio
So the front pasenger side sits 1.5" lower than the driver side. Thought suspension was shot. So I installed some new coil springs and shocks today. Didn't make a difference still sits 1.5" off
Anyone have any ideas what it could be
Anyone have any ideas what it could be
11-06-2012, 06:31 PM
CF Veteran
Join Date: May 2011
Location: Glendale,Az
Posts: 1,458
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
When replacing a renix exhaust manifold for a OE style replacement what is better Stainless steel or Cast iron? Iv seen both for around the same price.