Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Oct 2012
Location: Canton, GA
Posts: 2,314
Likes: 0
Received 3 Likes
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
If you lived anywhere near louisville ky, I'd say come over to my shop and I'd get ya taken care of.
If you can get to the back side of that ball stud, you could drill a new hole an inch lower and use a ball stud that bolts in vs. weld in. You would have to take a grinder and cut off the existing one and all that goose poop weld around it though. But I think with a fender washer behind it you'd be set.
Or maybe this is the perfect excuse to buy a small 'suitcase' welder
If you can get to the back side of that ball stud, you could drill a new hole an inch lower and use a ball stud that bolts in vs. weld in. You would have to take a grinder and cut off the existing one and all that goose poop weld around it though. But I think with a fender washer behind it you'd be set.
Or maybe this is the perfect excuse to buy a small 'suitcase' welder
So I'm continuing to hook up my audio system and have another question. I have a 4 gauge power wire from the battery with a 100 amp inline wire. It is run to the back of the jeep to which it will hook up to a 8 gauge power distribution block. Now, this is an unfused distribution block so should I have fuses on the 2 eight gauge wires coming from it going to my amps?
Ok thanks cause I was reading on car audio forum that it was. But it ie a complete kit that costs a lot so I'm sure if it was needed it would have came with one. I'm still trying to figure out why they sent me two of the same distribution blocks in the kit... My only thought is that it was an accident.
CF Veteran
Join Date: Jan 2012
Location: Michigan
Posts: 1,161
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
hey guys im going to install some 784 injectors in my jeep tonight. whats the best thing to use to lube the orings? ive heard dish soap, motor oil, vaseline, wd40?
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Just went to 33's. looking to upgrade my steering... What else other than ZJ X8 tie rod and ends and steering box brace? What brand brace?
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by 94XjSport94
Just went to 33's. looking to upgrade my steering... What else other than ZJ X8 tie rod and ends and steering box brace? What brand brace?
Member
Join Date: Jun 2011
Location: Post Falls, Idaho
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
does anybody here run the kc 69 series lights? i scored four for $35. but i noticed there is no ground wire could somebody tell where it should hook up to. any help is great
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
CF Veteran
Join Date: Sep 2012
Location: Springfield Virginia
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
How do I know which one of these is positive and which one is negative? It's the rca jack for my sub amp on my head unit (I believe)
Attachment 162382
Attachment 162382
1988 jeep wagoneer car alarm questions
ok so heres my question. i purchased this jeep in april of 2012 and it was all stock with 50,000 original miles. well i was tightening the bolts that come loose in the steering column and i looked under the dash and theres this little yellow box that says amc on in at theres 3 different adjustment screws. im looking to figure out 1 what each is for and 2 if im able to find a car alarm remote to program to it if it works. 1 says sensitivity adj. another says low sw. speed adj. and the last one is centering adj. any help would be great. i can post pictures if needed