Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Seasoned Member
Join Date: Jan 2013
Location: long island
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
You have to take the door panel off to get to the locking mechanism and the switches. It is not that tight just kind of awkward getting to the plastic retaining clips to release all of the metal connecting rods to get the mechanism out.
Roll the window up first before removing the panel. I had to unplug the lock mechanism and release 3 plastic clips then unbolt the lock mechanism to get it out.
If it is working with the power lock, you likely have a rod that came disconnected from the mechanism. You should be able to look with a light after the door panel is removed and see if the metal rod from the key lock is not connected to the lock mechanism.
Roll the window up first before removing the panel. I had to unplug the lock mechanism and release 3 plastic clips then unbolt the lock mechanism to get it out.
If it is working with the power lock, you likely have a rod that came disconnected from the mechanism. You should be able to look with a light after the door panel is removed and see if the metal rod from the key lock is not connected to the lock mechanism.
Seasoned Member
Join Date: Jan 2013
Location: long island
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
I had somewhat the same sound not to long ago, mine was a clanking sound only in drive/reverse, turned out to be the torque converter, had it replaced and the sound is gone
Senior Member
Join Date: Sep 2012
Location: Chesapeake Beach, MD
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L Inline 6
Quick question guys, I got new bumpers and need to paint them. Should I use Herculiner or the wally world Rustolem Bedliner? Anyone use either and have any recommendations? Thanks
☠ CF Sheriff ☠
I used the bumper+trim paint with the picture of the cherokee on it. Came out ****.
CF Veteran
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Junior Member
Join Date: Nov 2012
Location: Beverly, NJ
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: renix 4.0L
i have a 88 normally no transmissions problems what so ever (automatic) ... fluid is months old
on my way home from work last night it would not get out of 1st gear for about 6 min then JUMPED in to 2ed and from then on was fine till i arrived home what could this be?
on my way home from work last night it would not get out of 1st gear for about 6 min then JUMPED in to 2ed and from then on was fine till i arrived home what could this be?
☠ CF Sheriff ☠
adjust your kickdown cable at the throttle body
http://www.allpar.com/SUVs/jeep/cher...nsmission.html
http://www.allpar.com/SUVs/jeep/cher...nsmission.html
Junior Member
Join Date: Nov 2012
Location: Beverly, NJ
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: renix 4.0L
adjust your kickdown cable at the throttle body
http://www.allpar.com/SUVs/jeep/cher...nsmission.html
http://www.allpar.com/SUVs/jeep/cher...nsmission.html
Banned
Join Date: Dec 2012
Location: Saint George, SC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
need some help
i have a 96 xj i believe the fuel pump went bad my buddy has an 93 xj were doing from the ground up dose anyone know if the 93 and 96 fuel pump are the same i am not working so trying to cut corners to keep my jeep on the road please let me know . thanks o yea got my Cherokee forum sticker on my jeep its sweet