Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Old School CF Moderator
Join Date: May 2010
Location: Chattanooga
Posts: 9,652
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Everything is tight. I just replaced the lowers a week ago (with a set of stockers I had laying around).
I can grab the uppers and move them a tad side to side..Havent had them off yet though.
I can grab the uppers and move them a tad side to side..Havent had them off yet though.
CF Veteran
Join Date: Nov 2010
Location: Frisco, Tx
Posts: 3,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Would that make that loud of a crack? And it almost seems like its under my feet?
You could be right though..
Other things this POS does..
I hear a tick tick tick with each wheel revolution coming from teh drivers side ..stops when I brake..
Also pulls to the left if I get on the brakes hard enough.
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
It is the stock switch and stock 55W fog lights. It came stock with a relay so the power does not run thru the switch. Bulbs were replaced last summer.
Probably the switch. I just want to ask if switch failure is common. Darn switch costs $60 (with shipping - cost more to ship than the part is worth) from Rock Auto !!
Anyways, id look at the JY for a switch.
☠ CF Sheriff ☠
CF Veteran
Join Date: Nov 2010
Location: Frisco, Tx
Posts: 3,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
They're still good. I think the pads are just ****. What's a good replacement? I want ceramic ones but any particular brand?
CF Veteran
Join Date: Nov 2010
Location: Frisco, Tx
Posts: 3,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Napa ceramics. Then get your ****ing rotors turned before you toss the pads on. Grease every contact area between the pads and bracket and caliper. Also thoroughly clean and lube pins.
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
What part is that? Just never heard of "brake pins" lol
☠ CF Sheriff ☠
CF Veteran
Join Date: Nov 2010
Location: Frisco, Tx
Posts: 3,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0