Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I tried that, but there is another fastener under the rail comming up through the roof.
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Is the factory roof rail a good place to ground lights on a rack?
Is the unused plug behind the front bumper in the center of the jeep for the fog lights, and if so, is everything there except for the switch and relay to install a set?
Is the unused plug behind the front bumper in the center of the jeep for the fog lights, and if so, is everything there except for the switch and relay to install a set?
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
Mine had a pigtail on each side for factory fog lights.
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
I imagine if they're not down by the bumper, there is probably a place they attach to the rest of the harness, further up the line. I haven't looked that much at them.
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Apr 2010
Location: knoxville, tn
Posts: 3,966
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
Should be able to take the plastic end stops on the front or back ( there is a little tab on the stops so careful when taking them off) then those feet slide ride off
Senior Member
So lately the XJ has been getting poor fuel mileage and every time I step out of it, no matter the distance, there is a strong odor of raw fuel. Any known issues to the early 90's on this before I try to trace a leak down?
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
CF Veteran
Join Date: May 2011
Location: Glendale,Az
Posts: 1,458
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
Exhaust leak or leaking injector O rings would ve my guess. Iv got a bad exhause leak at the manigold and when under hard acceleration i could smell raw gas in the cab.
Senior Member
Join Date: Aug 2012
Location: Clear Lake, TX
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999 Jeep Cherokee
Model: Cherokee
Engine: 4.0
No one on the noise I have.
Is this what a torque converter sounds like?
https://www.cherokeeforum.com/f2/ask...772/index1412/
Is this what a torque converter sounds like?
https://www.cherokeeforum.com/f2/ask...772/index1412/
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
No one on the noise I have.
Is this what a torque converter sounds like?
https://www.cherokeeforum.com/f2/ask...772/index1412/
Is this what a torque converter sounds like?
https://www.cherokeeforum.com/f2/ask...772/index1412/
Banned
Join Date: Oct 2012
Location: USA
Posts: 1,744
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L i6
If you look at the photo, the door molding has come a bit loose and is raised off the door.
What do I use to glue it back on? I don't see a fastener that has popped loose.
Since it is raised, it was hitting into the fender.
This pushed the fender in, and made it interfere with the opening of the door.
I took a screwdriver and pried the fender back into place.
What do I use to glue it back on? I don't see a fastener that has popped loose.
Last edited by BimmerJeeper; 01-20-2013 at 06:37 PM.