Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Oct 2012
Location: Canton, GA
Posts: 2,314
Likes: 0
Received 3 Likes
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
Seasoned Member
Join Date: Aug 2010
Location: southern nj
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Originally Posted by NewKindOfClown
There was a change to the angle of the fan blades, but I don't recall the year. Have you hooked it up straight to battery? It's common for the controller to fail, leaving the fan dead. I bypassed the controller and ran mine to a switch in the cab.
Out it didn't work but we didnt get a chance to replace it and it's cheap enough I'd rather not run a toggle switch
Last edited by nygiants; 03-11-2013 at 05:02 PM.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Try unplugging the fan+shroud, pull it out, and connect it to battery. If it spins, your controller is bad. Easiest fix is to run it to a switch.
☠ CF Sheriff ☠
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Planning on Renix manifold, initially. Need to research. I don't have a local shop that can mandrel bend, and that's why I'm asking if there are pre-bent pipes I can buy somewhere. The clearance question was more to see if anything can be adjusted. It's likely due to my sagged out springs.
Seasoned Member
Join Date: Aug 2010
Location: southern nj
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Originally Posted by dukie564
Ok i'll ask - what makes you think it is bad?
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
While replacing my CPS (again), I realized my entire exhaust from downpipe to turndown is loose and able to shift. I need to secure it so it doesn't move again and cause more trouble, and then I can work on replacing my manifold and downpipe if new timing doesn't fix my backfire.
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Can some one with a L&L winch bumper please take pics of the mounts. I want to see how strong The welds are for the bracket that connects to the frame rails. Thanks in advance
Seasoned Member
Join Date: Aug 2010
Location: southern nj
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Originally Posted by NewKindOfClown
Try unplugging the fan+shroud, pull it out, and connect it to battery. If it spins, your controller is bad. Easiest fix is to run it to a switch.
Senior Member
Join Date: Apr 2009
Location: Houston Texas
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: I6
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
To pass your GED test I would assume you will need to be able to use proper sentence structure, work on that.
The answer to what I am assuming you are asking is... Nothing. They're a glorified paper weight. I you want one though, I will sell you mine.
The answer to what I am assuming you are asking is... Nothing. They're a glorified paper weight. I you want one though, I will sell you mine.
Last edited by 94XjSport94; 03-11-2013 at 09:39 PM.
I'm just gonna say this but it seems if you made a intake manifold spacer it could work