Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Aug 2012
Location: ks
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Running a mopar filter atm but pureone purolator is a great filter. And these 4.0's like rotella, I prefer the 10w30. IIRC, rotella t5 is semi synthetic and t6 is full synthetic. I chose neither and went with the standard engine oil (technically diesel oil). It also has a high zinc content.
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Junior Member
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Alright, so somebody tell me if i'm correct here. When i installed my lift, I was a cheap *** and never bought adjustable uppers or lowers, and just decided to get drop brackets so i could use my stock control arms. Now after the lift the steering wheel doesnt return back to center on its own when driving down the road. Is it the Caster that's causing this? I've got plenty of room for the lower control arms to go forward on the drop brackets (at least an inch or more), would adjusting my lowers fix it? I had an alignment and all they did was straighten the steering wheel and set my tie rod correctly.
I've also got a bad wheel bearing on the driver side if that changes things. The specs on the drop brackets also say the control arm length at 4.5" should be the exact same as stock and thats what i'm sitting at right meow.
I've also got a bad wheel bearing on the driver side if that changes things. The specs on the drop brackets also say the control arm length at 4.5" should be the exact same as stock and thats what i'm sitting at right meow.
Last edited by xj_maniac_newb; 03-14-2013 at 07:58 AM.
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
I did some googling for you.
Seems, caster and toe can indeed cause the problems you're having. I'd start with a tape measure, check your toe. Go from there.
Seems, caster and toe can indeed cause the problems you're having. I'd start with a tape measure, check your toe. Go from there.
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
I've done the googling, just want some insight from others. The toe is fine, as is the track bar alignment. And the fact that my control arms are right where they're supposed to be is what perplexes me. According to the numbers, everything should be up to spec. Hell my steering angles are even near perfect with the Track bar and drag link nearly perfectly parrallel. Just doesnt make any sense.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Join Date: Aug 2010
Location: Fountain Inn, SC
Posts: 1,085
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1988
Model: Comanche (MJ)
Engine: I6 4.0L
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Not sure about the horn. First thing i'd check would be the vacuum ball behind the passenger side of the front bumper, then the vacuum lines. Easy way to check them is spray em with starting fluid while the engine is running.
CF Veteran
Join Date: Aug 2010
Location: Fountain Inn, SC
Posts: 1,085
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1988
Model: Comanche (MJ)
Engine: I6 4.0L
well...when i bought the jeep that ball wasnt even attached to the bumper, it was just sitting in there....maybe it got damaged? but my vents work fine...
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Mine isnt attached either, doubt it got damaged. If the vents are working maybe its a fuse. I wouldnt go straight for the clockspring from the start, check the easiest stuff first.