94XjSport94

It needs to be like an 1.5 longer. ****. And yeah I have rocky road ones on there. Needed them when I did my 1.5 budget boost to get to 4.5 inches

Cherokeekid4x4

It lifted your jeep? Lol or just made your shocks longer?

94XjSport94

No lol. I lifted my Jeep from 3" to 4.5 and I used those on my rear shocks to keep the travel in them and allow me to still use those shocks. They drop the static ride height 1.25 inches

Cherokeekid4x4

Aw okay gotcha. Well I found,these (might be the same as you) http://www.rocky-road.com/pinadapt.html this will work if I put them in the rear? Could I self tap it in? I wanna swap my shocks but most of the bolts are broken and I need something to make replacing them easier

DESERTXJ206

Does anyone know the alldata times for the rear main seal?

Different shops around me are telling me different times. Id like to know for sure though.

odgreen

Stand by
Edit:seems my subscription expired.

94XjSport94

Yeah they work front or rear. I would only get these if you are lifting it up higher. Otherwise, there are BPE's that don't drop them as much

DESERTXJ206

Mine did too like a month ago and i didnt find out till today when i tried lookin the times up.

One place says if i provide materials they will charge 290 for labor. Another place says it takes 5.7hrs and that it will be 591 if i dont provide materials. But more if i do provide materials.

ScikoFaery

So its cold and raining its *** off today and I just finished my route and didnt have one problem with the jeep it idled normal no stuttering etcetc cel is still on and I filled up with mid grade yesterday but thats it ...guess I just need to insulate my new injectors when I install them....but what do I use?

Eagle564

Are you at 4.5"s of lift? What year front shaft did u snag for your rear?

Im concerned mine won't be long enough now.

94XjSport94

Yes. Should be from a 95 auto 6cyl. Looks like I need a ZJ one which is about 2 inches longer

Eagle564

Dang i didnt know a zj was an option. Well ill measure my length and see what i get first. Although how much will the gap change with an sye installed? Wouldnt it shorten the yoke so i'd need an even longer shaft? I got time before my sye install to try and find one.

Cherokeekid4x4

Okay man, I'm assuming I can put those in the rear too? Thanks!

outofcommission

I have to shift my automatic transmission manually to shift through all of the gears, local guy says I need a tranny... What do you guys think?

ScikoFaery

check your solenoids? i had a fried one and it kept my jeep from shifting 1-2